Table of Contents
Advertisement
using advanced functions
USING THE TURBO FUNCTION
Turbo function will be helpful to cool your room quickly and effectively by operating at the maximum
fan speed for 30 minutes.
1. Turn on the air conditioner.
Press the Power
controller.
2. Set the operation mode.
Press the Turbo/Long button on the remote
controller once. Turbo indicator will appear on the
remote controller display.
The air conditioner operates in High fan speed
and automatically adjusts the temperature
according to the current room temperature.
The unit operates for 30 minutes and then
operates in last used mode or in Auto mode if
Dry/Fan mode is most recent mode used.
• Turbo function is only available in Cool/Auto mode.
If Turbo function is selected in Dry/Fan mode, operation mode changes to Auto.
• You cannot use Turbo and Long function at the same time.
To deactivate Turbo function
1. Press the Turbo/Long button on the remote controller twice while Turbo function is on.
The air conditioner operates in last used mode or in Auto mode if Dry/Fan mode is most
recent mode used.
• While you are using the remote controller, make sure corresponding indicator appears
on the remote controller display.
• Temperature/Fan speed cannot be adjusted while using this function.
• Air flow can be adjusted manually (see pages 20~21 for instructions).
• If you press the Mode button while the Turbo function is on, it will cancel the function.
18_ using advanced functions
button on the remote
Advertisement
Table of Contents
