Set Up Ip Filtering - SURFboard SBG6700-AC User Manual

Set Up IP Filtering

You can use IP Filtering to configure Internet access restrictions on specific network devices on
your home network using their IP addresses. You will have to create IP address filters that
contain the starting and ending IP address range of each device for which you want to block
Internet access.
To configure IP filters:
1. From any web manager screen, click the Advanced menu button on the SBG6700-AC Web
Manager main menu bar.
2. Click IP Filtering from the Advanced submenu options list to display the Advanced IP
Filtering screen.
3. Enter the least significant byte of the starting IP address for the range you are setting up in
the Start Address field.
4. Enter the least significant byte of the ending IP address for the range you are setting up in
the End Address field.
5. Select Enabled to activate the IP address filter.
6. Repeat steps 3 thru 5 for each additional range of IP addresses that you want to block
Internet access.
7. Click Apply to create your IP filters.
PN 365-095-25781 x.2
Copyright 2014-2016, ARRIS Enterprises, LLC. All rights
Chapter 8: Protecting & Monitoring Your Wireless Network
Figure 50: Set Up IP Filters Screen
SURFboard SBG6700-AC Wireless Gateway User Guide
reserved. 59