Setting Up A Wireless Network Connection; Launch The Sbg6700-Ac Quick Start Wizard - SURFboard SBG6700-AC User Manual

Wireless gateway
Hide thumbs Also See for SBG6700-AC:
Table of Contents

Advertisement

Setting Up a Wireless Network Connection

ARRIS recommends that you first verify that your computer can connect to the Internet using
an Ethernet connection before configuring your wireless network.
You must currently have access to an Internet service in your home before you can set up a
wireless network connection. Also, make sure your computer and the SBG6700-AC are
connected through an Ethernet connection.
Choose one of the following options to set up your wireless network connection:

Launch the SBG6700-AC Quick Start Wizard

Set Up a Wireless Network Using Your Computer
After setting up your wireless connection on your home network, you should check that your
wireless network connection was set up properly. See
(page 32) for more information.
Launch the SBG6700-AC Quick Start Wizard
The SBG6700-AC Quick Start Wizard is a seven-step application to help you quickly configure
the default wireless network settings on your SBG6700-AC. It configures your SBG6700-AC
wireless network name (SSID), Wi-Fi Security key (network password), and Wi-Fi Security
code.
IMPORTANT NOTE: The quick start wizard uses the default settings already configured for
your SBG6700-AC to help you quickly set up your wireless home network. However, the wizard
will only let you change the wireless network name (SSID) and Wi-Fi Security key (network
password). After completing the wizard and getting your SBG6700-AC connected to the
Internet, you will be able to make additional network configuration changes to further
customize your wireless home network and connect your wireless devices. See
Your Wireless Network
1. Open a web browser (such as Internet Explorer, Google Chrome, Firefox, or Safari) on the
computer connected to the SBG6700-AC.
2. Type the default LAN IP address, 192.168.0.1, in the Address bar and then press
log onto the SBG6700-AC.
The Gateway Login screen displays (see Figure 5).
3. Type the following default username and password. Both entries are case-sensitive.
Username: admin
Password: password
PN 365-095-25781 x.2
Copyright 2014-2016, ARRIS Enterprises, LLC. All rights
(page 41) for more information.
reserved.
(page 20)
(page 26)
Test Your Wireless Network Connection
SURFboard SBG6700-AC Wireless Gateway User Guide
Chapter 5
Configuring
Enter
to
20

Advertisement

Table of Contents
loading

Table of Contents