Set Up Ip Filtering - SURFboard SBG6580 User Manual

7. Enter a name for the user profile that you want to create in the Description field.
8. Enter the 12-digit (hexadecimal) MAC address of the device for which you are creating
Parental Controls in the MAC Address field.
9. Enter the web address of the Internet site that you want to block or access.
10. Enter the Starting port number of the in the Start Port field.
11. Enter the Ending port number of the in the End Port field.
12. Select the days of the week that you want to allow the selected user to access the
Internet.
13. Select the time range that you want to allow the selected user to access the Internet.
14. Select to Allow or Block Internet access for the time and days you set previously.
15. Select On or Off in the Enabled field to enable or disable this Parental Control restriction.
16. Click Apply, when done.

Set Up IP Filtering

You can use IP Filtering to configure Internet access restrictions on specific network devices on
your home network using their IP addresses. You will have to create IP address filters that
contain the starting and ending IP address range of each device for which you want to block
Internet access.
To configure IP filters:
1. From the SBG6580 Web Manager, click Advanced on the SBG6580 Main Menu bar.
2. Click IP Filtering from the Advanced submenu options to open the Advanced IP Filtering
screen.
PN 365-095-25782 x.1
Copyright ARRIS Enterprises, LLC. 2013-2016. All Rights Reserved.
Chapter 8: Protecting & Monitoring Your Wireless Network
Figure 57: Set Up IP Filters Screen
SURFboard SBG6580 Wireless Gateway User Guide
61