Special Version: Open Flue Operation And Installed In The Living Space (Occupied Area) With Interconnected Room Air Supply (Rated Heating Output ≤ 35 Kw); Flue Gas Header For Several Vitodens - Negative Pressure - Viessmann VITODENS Technical Manual

Flue systems for gas condensing boilers
Hide thumbs Also See for VITODENS:
Table of Contents

Advertisement

Flue systems
(cont.)
Special version: Open flue operation and installed in the living space (occupied area) with interconnected
room air supply (rated heating output ≤ 35 kW)
A Flue gas
B Ventilation air
C Secondary ventilation
D Door
E Interconnected air supply
Flue gas header for several Vitodens 200-W, 222-W and 222-F – positive pressure
A Flue gas
B Secondary ventilation
C Ventilation air
Flue gas header for several Vitodens – negative pressure
A Flue gas
B Ventilation air
VITODENS AND VITOSOLAR
Routing through a shaft
or
Connection to a moisture-resistant chimney
(Type B
, to TRGI 2008)
33
The boiler draws combustion air from the living space via a coaxial
pipe with ventilation air apertures upstream of the shaft inlet and expels
the flue gas either via a flue pipe or via a moisture-resistant chimney
through the roof (combustion air supply via interconnected rooms
according to TRGI).
For a detailed description, see page 35.
Type B
, to TRGI 2008
23
Several boilers inside the same room draw combustion air from outside
via ventilation apertures and expel the flue gas through a common flue
pipe to the outside via the roof.
For a detailed description, see page 37.
Type B
, to TRGI 2008
23
Several boilers inside the same room draw combustion air from outside
via ventilation apertures and expel the flue gas through a common flue
pipe to the outside via the roof.
For a detailed description, see page 45.
1
VIESMANN
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vitosolar

Table of Contents