Download Print this page

Kenwood BL570 Series Instructions Manual page 5

Advertisement

safety
IMPORTANT: HOT BLENDING INSTRUCTIONS
To minimise the possibility of scalding when blending hot ingredients keep
hands and other exposed skin away from the lid to prevent possible burns.
The following precautions must be observed:
CAUTION: Blending very hot ingredients may result in hot
G
liquid and steam being forced suddenly past the lid or filler
cap
.
We recommend that hot ingredients are allowed to cool before
G
blending.
NEVER exceed 1200ml / 5 cups capacity if processing hot liquids, such as
G
soups (refer to the markings on the goblet).
ALWAYS commence blending at a low speed and gradually increase the
G
speed. NEVER blend hot liquids by using the Pulse setting.
Liquids which tend to foam such as milk, should be limited to a maximum
G
capacity of 1000ml/4 cups.
Take care when handling the blender as the goblet and its contents will be
G
very hot.
Take particular care when removing the lid. The lid is designed to be a tight
G
fit to prevent leakage. If necessary protect your hands with a cloth or oven
gloves when handling.
Ensure the goblet is securely attached to the base and when removing from
G
the appliance, guide the base and ensure it is removed together with the
goblet.
Ensure that the lid and filler cap are securely in place before every blending
G
operation.
Always ensure that the vents in the filler cap are clear before every blending
G
operation
When fitting the lid to the goblet always ensure that the lid and goblet rim
G
are clean and dry to ensure a good seal and prevent spillage.
before plugging in
Make sure your electricity supply is
G
the same as the one shown on the
underside of the appliance.
Important - UK only
The wires in the cord are coloured
G
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
G
a 13A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
G
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
.
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
G
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
4

Advertisement

loading

This manual is also suitable for:

Bl580 series