Advertisement
key
blender
filler cap
lid
goblet
blender sealing ring
blender blade unit
power unit
speed + pulse control
ice crushing button
cord storage
vents
multi mill (if supplied)
multi mill jar
mill sealing ring
mill blade assembly
grinding mill (if supplied)
mill jar
grinding mill blade assembly
grating mill (if supplied)
mill jar
grating mill blade assembly
Note: The mill and goblet blade
assemblies are a different size
and are not interchangeable.
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring
the blender blade unit
the seal is located correctly in the
grooved area.
Leaking will occur if the seal
G
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet – ensuring the blade
assembly is fully tightened
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Fit the filler cap to the lid and push
down to secure.
5 Fit the lid by pushing down until
secure.
6 Place the blender onto the power
G
7 Select a speed (refer to the
G
G
G
G
to use your multi mill
(if supplied)
into
- ensuring
1 Put your ingredients into the jar
2 Fit the mill sealing ring
G
. Refer
3 Turn the blade unit
4 Place the mill onto the power unit
5 Select a speed or use the pulse
5
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a "click"
The appliance won't work if
the blender is incorrectly
fitted.
recommended speed chart).
blender hints
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep your
hand over the opening. For best
results empty regularly.
The processing of spices is not
recommended as they may damage
the plastic parts.
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
Use your multi mill for milling herbs,
nuts, coffee beans and purees.
Fill it no more than half full.
mill blade unit
is located correctly in the grooved
area.
Ensure that the seal is fitted
correctly.
Lower it into the jar, blades down
Turn anti-clockwise to lock.
and lock by turning clockwise until
you hear a "click"
control.
into the
- ensuring the seal
upside down.
.
.
.
.
Advertisement
