Brother DCP-T300 Advanced User's Manual page 30

Chapter 7
f
If you do not want to change additional
settings, press
Inicio Negro (Black Start) or
Inicio Color (Color Start) to scan the
page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
1
DCP-T700W and MFC-T800W only
If you are using the scanner glass, go
to step g.
g
(MFC-T800W)
After the machine has scanned the
page, press 1 to scan the next page.
(DCP-T300, DCP-T500W and
DCP-T700W)
After the machine has scanned the
page, press a to scan the next page.
h
Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps g and h for each page of
the layout.
i
(MFC-T800W)
After all the pages have been scanned,
press 2 to finish.
(DCP-T300, DCP-T500W and
DCP-T700W)
After all the pages have been scanned,
press b to finish.
NOTE
• Make sure the paper size is set to
Letter, A4 or Executive.
• Poster copy is not available for Executive
size paper.
• You can only make one color copy at a
time.
• You can only make one Poster copy at a
time.
• (P) means Portrait and (L) means
Landscape.
26
Place the document face down in the
direction shown below:

2in1(P)
1

2in1(L)

4in1(P)

4in1(L)

Poster(3x3)
NOTE
The poster copies have overlapping
portions so that you can easily paste them
together.