SWITCHES
Raindrop detection type
12L167
" 1 Automatic control adjuster
To turn the wipers on, move the lever down until you reach
the desired speed setting.
The ignition switch must be in the "ON" position.
There are 3 settings:
"AUTO" position — Automatic operation
"LO" position — Low speed operation
"HI" position — High speed operation
60
Automatic operation
The wiper speed is determined by the vehicle speed and
the amount of raindrops and sunlight detected by the
automatic wiper control sensor.
Twist the automatic control adjuster in the "–" direction to
lower the sensitivity, and the "+" direction to boost the
sensitivity.
2 Washer on
The sensor is on the inside of the windshield as shown above.
12L168