Driving Position Memory System; Setting The Driving Position - Lexus 2004 LS430 Owner's Manual

DRIVING POSITION MEMORY
SYSTEM
A microcomputer will memorize the position of the driver's
seat, the height of the head restraint of the driver's seat, the
seat cushion length of the driver's seat, the height of the
shoulder belt anchor of the driver's seat belt, and the positions
of the tilt and telescopic steering, and outside rear view mirrors.
Three different driving position profiles can be entered into the
computer's memory.
Recording a driving position in the computer's memory can
only be done when the ignition switch is in the "ON" position
and the selector lever is in the "N" or "P" position.

Setting the driving position

16L299
1. Adjust the driver's seat, driver's head restraint height
and seat cushion length, driver's shoulder belt anchor, tilt
and telescopic steering and outside rear view mirrors to
the desired position.
OCCUPANT RESTRAINT SYSTEMS
2. While pushing the "SET" button, push button "1", "2"
or "3" until the signal beeps.
The beep sound means that the positions are recorded in the
computer's memory.
By repeating these two steps and pressing the remaining
button, the driving position for another driver can be recorded.
To set a new memorized position, select the desired position
and perform step 2. The previous memory will be erased and
the new position will be set.
To make only slight changes to an already memorized position,
the easiest way is to first activate the memorized position, then
make the desired changes and perform step 2 above.
219