Mileage Reset Message - Lexus 2004 LS430 Owner's Manual

GAUGES, METERS AND SERVICE REMINDER INDICATORS
In normal conditions, due to engine oil consumption, this
message may appear earlier than the specified service interval
of the scheduled maintenance. This is because the engine oil
is consumed to the low level within the scheduled maintenance
interval and does not indicate a problem. (For detailed
information, see "Facts about engine oil consumption" on page
461.)
NOTICE
Continued engine operation with low engine oil will
damage the engine.
94
w282
This message indicates that the engine oil maintenance
data has been reset. After replacing the engine oil, be sure
to reset the maintenance data.
To reset the data, perform the following operations:
1. Push the "ODO/TRIP" button to change the display to
blank.
2. Turn the ignition switch off.
3. Turn the ignition switch to "ON" with the trip meter
"RESET" button held down.
4. Keep pushing the "RESET" button for longer than 5
seconds after the ignition is turned on.
After the above operation, the master warning light comes
on, a warning tone sounds and the above message
appears to inform you that the engine oil maintenance
data has been reset. (U.S.A. only)