Changing The Dynamic Radar/Laser Cruise Control Mode - Lexus 2004 LS430 Owner's Manual

Changing the dynamic radar/laser cruise
control mode
31L174
" 1 Vehicle-to-vehicle distance control mode
2 Conventional (fixed speed) cruise control mode
When you push the main switch, the vehicle- to- vehicle
distance mode is activated. To change to the conventional
(fixed speed) cruise control mode, push the lever in the
"MODE" direction for longer than about 1 second.
However, once the vehicle-to-vehicle distance control mode
activates and is used, it cannot be changed to the conventional
(fixed speed) cruise control mode using the above operation.
To change the mode, turn the main switch off and then on. Next
push the lever in the "MODE" direction for longer than about 1
second.
STARTING AND DRIVING
To change to the vehicle-to-vehicle distance control mode
from the conventional (fixed speed) cruise control mode, push
the lever in the "MODE" direction for longer than about 1
second.
CAUTION
In the conventional (fixed speed) cruise control mode,
a warning tone does not sound to warn you if you are too
close to the vehicle ahead, as neither the presence of
the vehicle ahead nor the vehicle-to-vehicle distance is
detected. Pay special attention to the distance between
your vehicle and the vehicle ahead. Always confirm the
setting in the multi-information display.
For the vehicle-to-vehicle distance control mode, see the
following description. For the conventional (fixed speed)
cruise control mode, see page 352.
329