Applying Power - Samsung Ubigate iBG2006 Installation Manual

CHAPTER 3. Ubigate iBG2006 Installation

Applying Power

Before applying power to a Ubigate iBG2006, make sure that appropriate
procedures have been completed, and that an operator console has been
connected to the router.
To apply power to the Ubigate iBG2006:
1.
Ensure that the Ubigate iBG2006 is connected to a power source.
2.
Press the rocker switch on the Ubigate iBG2006 back panel to the on
position( | ).
The fans start, the LEDs cycle, and the router performs a self test. At the
successful conclusion of the self-test sequence, the Power LED illuminates
green. Other status LEDs will be in various states.
This is a normal condition when the router is not configured for specific
network line conditions.
The login prompt is displayed on the console screen.
3-12
© SAMSUNG Electronics Co., Ltd.