Powering Up the Ubigate iBG2006
Ubigate iBG2006 is shipped with 100 Watt AC Power Supply Module by
default. Optionally, a 230 Watt AC Power Supply Module can be ordered. The
230 Watts Power Supply Module supports IEEE802.3af PoE functionality.
This chapter describes how to power up the Ubigate iBG2006.
Connecting AC Power
To connect power to the AC power supply, connect the AC power connector to
the power supply. Connect the other end to a grounded power receptacle rated
for the Ubigate iBG2006.
© SAMSUNG Electronics Co., Ltd.
Before connecting cables or performing maintenance on a Ubigate
iBG2006, always wear an ESD-preventative wrist strap. Make sure
that the wrist strap makes contact with your skin
Figure 3.10 AC Power Connection
Ubigate iBG2006 Installation Manual/Ed.01
3-11