Disassembly And Reassembly Of The Magazine Section - Hitachi NV 83A2 Technical Data And Service Manual

10-4. Disassembly and Reassembly of the Magazine Section

Tools required:
Phillips screwdriver
Roll pin pullers (4 mm dia., 2.5 mm dia.)
Hex. bar wrench (4 mm)
Wrench M5
(1) Disassembly and reassembly of the magazine section
(a) Disassembly (See Fig. 15.)
Loosen the Hex. Socket Hd. Bolt M5 x 20 [100] and the Nylon Nut M5 [78] then remove the Sleeve [79].
Deform Guard [80] using a flat-blade screwdriver and disengage it from the Tail Cover [31].
Loosen the Machine Screw M5 x 25 [44] of the Body (B) [27]. Then the Magazine Ass'y [108] can be
removed.
Engaged.
Fig. 14
--- 29 ---
Deform Guard [80] by inserting
a flat-blade screwdriver.