Disassembly And Reassembly Of The Driving Section - Hitachi NV 83A2 Technical Data And Service Manual

10-5. Disassembly and Reassembly of the Driving Section

Feeder Shaft Ring [32]
Feeder Spring [33]
Roll Pin D3 x 16 [34]
Feeder Set [35]
Feeder Shaft [36]
Nylock Hex. Socket
Hd. Bolt M8 x 22 [37]
Adjuster Bolt [38]
Ratchet Spring (A) [40]
Ratchet Spring
(A) [40]
Roll Pin D2.5 x 18 [41]
Body (B) [27]
Cylinder O-ring [28]
Piston Bumper (B) [29]
Gasket (A) [30]
Tail Cover [31]
Adjuster [39]
Spring [50]
Roll Pin D2.5 x 18 [41]
Adjuster [39]
Adjuster Bolt [38]
Fig. 17 Disassembly and reassembly of the driving section
Safety Plunger (B) [61]
Feed Spring [72]
Feed Piston [70]
O-ring (P-9) [69]
Safety Bolt [51]
Valve Guard [52]
Roll Pin D3 x 45 [53]
Pushing Lever [54]
Nut M5 [55]
Tail Cover [31]
--- 32 ---
Seal Lock Hex. Socket
Hd. Bolt M5 x 10 [76]
Magazine Bushing [77]
Feed Piston Cover [75]
Feed Piston Cover (A) [74]
Bumper [73]
O-ring (P-22) [71]