Disassembly And Reassembly Of The Cap And The Magazine Section - Hitachi NV 45AC Technical Data And Service Manual

10-5. Disassembly and Reassembly of the Cap and the Magazine Section

(1) Disassembly and reassembly of the Cap [49] (See Fig. 24)
[Tool required]
Wrench (23 mm)
(a) Disassembly
The Cap [49] has an M42 mm screw portion. Hold the two flat portions of the Cap [49] with a wrench (23 mm)
and turn the Cap [49] to remove it.
(b) Reassembly
Disassembly procedures should be followed in the reverse order. Apply grease to the O-Ring (I.D 37.2) [48]
before reassembly.
Body Ass'y [21]
Fig. 24 Disassembly and reassembly of the cap
--- 29 ---
Cap [49]
O-Ring (I.D 37.2) [48]