Canon imageRUNNERC1028iF Starter Manual page 50

EMC requirements of EC Directive
This equipment conforms with the essential EMC requirements of EC
Directive. We declare that this product conforms with the EMC
requirements of EC Directive at nominal mains input 230 V, 50 Hz
although the rated input of the product is 220 to 240 V, 50/60 Hz. Use of
shielded cable is necessary to comply with the technical EMC
requirements of EC Directive.
International ENERGY STAR Program
As an ENERGY STAR® Partner, Canon Inc. has
determined that this product meets the ENERGY
STAR Program for energy eiciency.
The International ENERGY STAR Oice Equipment
Program is an international program that
promotes energy saving through the use of
computers and other oice equipment.
The program backs the development and
dissemination of products with functions that
efectively reduce energy consumption. It is an
open system in which business proprietors can
participate voluntarily.
The targeted products are oice equipment, such
as computers, displays, printers, facsimiles, and
copiers. The standards and logos are uniform
among participating nations.
IPv6 Ready Logo
The protocol stack included in this machine has
obtained the IPv6 Ready Logo Phase-1 established
by the IPv6 Forum.
Laser Safety Information
Laser radiation could be hazardous to the human body. For this reason,
laser radiation emitted inside this equipment is hermetically sealed
within the protective housing and external cover. No radiation can leak
from the machine in the normal operation of the product by the user.
This machine is classiied as a Class 1 Laser Product under IEC60825-1:
2007 and EN60825-1:2007.
220–240 V Model
The label shown below is attached to the laser scan unit on the machine.
This machine has been classiied under IEC60825-1:2007 and EN60825-1:
2007 and conforms to the following classes:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL Á LASER DECLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1
48
Use of controls, adjustments, or performance of procedures other than
those speciied in the manuals for the machine may result in hazardous
radiation exposure.
Trademarks
Canon, Canon logo, imageRUNNER, and iW are trademarks of Canon Inc.
Microsoft, Windows, Windows Server, and Windows Vista are trademarks
or registered trademarks of Microsoft Corporation in the U.S. and/or
other countries.
All other product and brand names are registered trademarks,
trademarks or service marks of their respective owners.
Copyright
Copyright © 2010 by Canon Inc. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language
in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual, or otherwise, without the prior written permission of
Canon Inc.
UFST: Copyright (C) 1989-2003 Monotype Imaging, Inc.
Third Party Software
A. This product includes third-party software modules. Use and
distribution of this software modules, including any updates of such
software modules (collectively, the "SOFTWARE") are subject to
conditions (1) through (9) below.
(1) You agree that you will comply with any applicable export control
laws, restrictions or regulations of the countries involved in the event
that this product including the SOFTWARE is shipped, transferred or
exported into any country.
(2) Rights holders of the SOFTWARE retain in all respects the title,
ownership and intellectual property rights in and to the SOFTWARE.
Except as expressly provided herein, no license or right, expressed or
implied, is hereby conveyed or granted by rights holders of the
SOFTWARE to you for any intellectual property of rights holders of the
SOFTWARE.
(3) You may use the SOFTWARE solely for use with the Canon product you
purchased (the "PRODUCT").
(4) You may not assign, sublicense, market, distribute, or transfer the
SOFTWARE to any third party without prior written consent of rights
holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the SOFTWARE only
when (a) you assign all of your rights to the PRODUCT and all rights
and obligations under the conditions to transferee and (b) such
transferee agrees to be bound by all these conditions.
(6) You may not decompile, reverse engineer, disassemble or otherwise
reduce the code of the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the
SOFTWARE or create derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of the
SOFTWARE from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is
not licensed to you.
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE
LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF
THIS MATERIAL.