Canon imageRUNNERC1028iF Starter Manual page 38

3 Set up Computers and Software
3
Make sure that the boxes next to
the UFR II Printer Driver, FAX Driver
(imageRUNNER C1028iF or C1028i
with the optional Super G3 FAX
Board attached) and Manuals are
checked.
–
Color Network ScanGear is an
application software that can
only be used in the network. If
the machine is connected using
a USB connection, uncheck the
box next to Color Network
ScanGear, as it is unnecessary.
–
If you want to install only the
UFR II Driver, select only the
UFR II Printer Driver in this step,
then proceed to the next step.
For more information refer to
the Printer Driver Installation
Guide (located on the UFRII LT/
FAX User Software CD-ROM).
–
If you want to install only the fax
driver, select only the FAX Driver
in this step, then proceed to
step 13. For more information
refer to the Fax Driver
Installation Guide (located on
the UFRII LT/FAX User Software
CD-ROM).
–
If the amount of free disk space
is insuicient to install the
software, an error message is
displayed. Make sure there is
suicient disk space, and then
try installing the software again.
36
4
5
6
7
8
9
10
If the dialog box shown below
appears, press [Retry] to continue
the installation.
11
Connect the machine and your
computer with a USB cable (A).
–
The USB cable is not included.
–
If the Found New Hardware
Wizard appears, click [Cancel]
and continue the installation.