Canon imageRUNNERC1028iF Starter Manual page 21

1
Press (Main Menu).
2
Press the right Any key to select <Additional
Func.>.
3
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<System Management Set.>, then press [OK].
If the screen appears prompting you to enter the System
Manager ID and System Password, enter the System
Manager ID and System Password using
keys), then press (Log In/Out). For details, see
"Security, " in the e-Manual.
4
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<Network Settings>, then press [OK].
5
Changes to the IP address, subnet mask, and gateway
address settings will be efective after restarting the
machine.
6
7
- (numeric
For instructions on the settings for IPv6, see "Network
Settings, " in the e-Manual.
2 Set Up the Machine
Press the right Any key to select <Done>.
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<TCP/IP Settings>, then press [OK].
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<IPv4 Settings>, then press [OK].
19