Canon imageRUNNERC1028iF Starter Manual page 22

2 Set Up the Machine
8
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select <IP
Address Settings>, then press [OK].
9
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<Manual Settings>, then press [OK].
10
Use - (numeric keys) to enter the IP
address, then press [OK].
20
11
Use - (numeric keys) to enter the
subnet mask then press [OK].
12
Use - (numeric keys) to enter the
gateway address, then press [OK].
13
Press (Main Menu) to return to the
Main Menu screen.
14
Press the main power switch on the right
side of the machine to " " side, wait at least
10 seconds, and then press the main power
switch to "I" side.