Canon imageRUNNERC1028iF Starter Manual page 34

3 Set up Computers and Software
55
Remove the PCL User Software
CD-ROM.
If you want to install the PS Driver
(when the optional PS Printer Kit is
attached), go to the next step.
56
Insert the PS User Software CD-
ROM.
57
If the CD-ROM Setup screen is not
displayed, click [start] on the
Windows task bar → [My
Computer].
Windows 2000: double-click [My
Computer] on the Windows
desktop.
Windows Vista/7/Server 2003/
Server 2008: click [Start] on the
Windows task bar → [Computer]
([My Computer]).
Open the CD-ROM icon, then
double-click [MInst] ([MInst.exe]).
32
If a language selection screen is
displayed before the CD-ROM
Setup screen, select a language
and then click [Next].
58
Select the PS Printer Driver and
Manuals.
59
60
61
62
63
–
If you are using a shared printer
in the Print Server (Point and
Print) environment, it is
necessary to install the Canon
Driver Information Assist Service
in the server computer to set up
the printer coniguration
automatically or use
Department ID Management.
–
If the Canon Driver Information
Assist Service is already installed
on your computer, this screen is
not displayed.
–
If you are using an operating
system equipped with Windows
Firewall, the following message
box may appear. If you want to
use Canon Driver Information
Assist Service, click [Yes]. If you
select [No], you cannot use
Canon Driver Information Assist
Service.