Mechanical Instructions - Philips 190CW7CS/00 Service Manual

10
190CW7 LCD
Front view
Back view
1. Remove the base .
a: Place the monitor face down on a smooth surface as Fig.3.
Be carefully to prevent the scratch and injury during the
uninstallation. Press the botton and push the base as Fig.3.
Base
b: Drag the click to left and slip the stand bottom to left at the same time
as Fig.4.
c: Remove the three screws and remove the hinge and stand top as
Fig.5.
Mechanical Instruction
Fig.1
Fig.2
Botton
Fig.3
Fig.4
Fig.5
2: Remove the Back Cover Assy
a. Unscrew 1 screws as shown in Fig.6.
b. Open 10 clicks on right and left side as shown in Fig.7 and Fig.8.
c. Open 7 clicks on bottom side as shown in Fig.9.
d. Open 7 clicks on top side as shown in Fig.10.
e. Remove the BACK COVER ASSY in Fig.11.
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11