Philips 220CW8FB/05 User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 220CW8FB/05
  6. User manual
Philips 220CW8FB/05 User Manual

Philips 220CW8FB/05 User Manual

Philips lcd widescreen monitor 220cw8fb 22" wide wsxga+
Hide thumbs
Table of Contents

Advertisement

Quick Links

Philips LCD Monitor Electronic User＇ s Manual
220CW8
PHILIPS

Advertisement

Table of Contents
loading

Related Manuals for Philips 220CW8FB/05

Summary of Contents for Philips 220CW8FB/05

  • Page 1 Philips LCD Monitor Electronic User＇ s Manual 220CW8 PHILIPS...

  • Page 2: Safety And Troubleshooting Information

    ● seconds before attaching the power cable or DC power cord for normal operation. Please use approved power cord provided by Philips all the time. If your power cord is ● missing, please contact with your local service center. (Please refer to Customer Care...
  • Page 3 Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or ● extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, ● please use the monitor in a location that falls within the following temperature and humidity ranges.

  • Page 4: Faqs (Frequently Asked Questions)

    When I install my monitor what should I do if the screen shows 'Cannot display this video LCD Panel Technology mode'? Ergonomics, Ecology and Safety Standards Recommended video mode for Philips 22": 1680x1050 @60Hz. Troubleshooting Unplug all cables, then connect your PC to the monitor that you used Regulatory Information previously.
  • Page 5 How do I adjust the resolution? Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties" What if I get lost when I am making monitor adjustments? Simply press the OK button, then select 'Reset' to recall all of the original factory settings.
  • Page 6 from the top to the bottom of the screen determines flicker, an active matrix display uses an active element (TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology. Will the LCD screen be resistant to scratches? A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil).

  • Page 7: Screen Adjustments

    Yes. Philips LCD monitors have this optional feature. For standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard arms or accessories. We recommend to contact your Philips sales representative for more information.

  • Page 8: Lcd Panel Technology

    Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information. Are Philips LCD monitors Plug-and-Play? Yes, the monitors are Plug-and-Play compatible with Windows®...
  • Page 9 What is a Liquid Crystal Display? A Liquid Crystal Display (LCD) is an optical device that is commonly used to display ASCII characters and images on digital items such as watches, calculators, portable game consoles, etc. LCD is the technology used for displays in notebooks and other small computers.

  • Page 10: Ergonomics, Ecology And Safety Standards

    What kind of wide-angle technology is available? How does it work? The TFT LCD panel is an element that controls/displays the inlet of a backlight using the dual-refraction of a liquid crystal. Using the property that the projection of inlet light refracts toward the major axis of the liquid element, it controls the direction of inlet light and displays it.
  • Page 11 U.S. National Electrical Code and UL Standards. Does the LCD monitor conform to general safety standards? Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 99/03 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability.

  • Page 12: Troubleshooting

    Troubleshooting FAQs This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these Common Problems solutions, contact Philips customer service representative. Imaging Problems Common Problems Regulatory Information Other Related Information...
  • Page 13 Check that the signal cable is properly connected to the ● Image vibrates on the screen graphics board or PC. Vertical flicker appears Press the Auto button. ● Eliminate the vertical bars using the Phase/Clock of More ● Settings in OSD Main Controls. Horizontal flicker appears Press the Auto button.
  • Page 14 For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. RETURN TO TOP OF THE PAGE...

  • Page 15: Regulatory Information

    Important parameters are luminance, contrast, resoluction, Ergonomie Hinweis (nur reflectance, colour rendition and image stability. Deutschland) • Philips End-of-Life Disposal Energy Information for UK only China RoHS Energy-saving mode after a certain time-beneficial both for the user and the environment ●...
  • Page 16 Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors.
  • Page 17 RETURN TO TOP OF THE PAGE CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950-1:2001 (Safety requirement of Information Technology Equipment)
  • Page 18 Power Saving Alternative 2 OFF (Sleep) Amber One step Switch Off ® PHILIPS s an NERGY artner, ® NERGY guidelines for energy efficiency. We recommend you switch off the monitor when it is not in use for a long time.
  • Page 19 FCC Declaration of Conformity Trade Name: Philips Philips Consumer Electronics North America P.O. Box 671539 Responsible Party: Marietta , GA 30006-0026 1-888-PHILIPS (744-5477) Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 20 RETURN TO TOP OF THE PAGE EN 55022 Compliance (Czech Republic Only) RETURN TO TOP OF THE PAGE MIC Notice (South Korea Only) Class B Device Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas.
  • Page 21 RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ...
  • Page 22 Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. RETURN TO TOP OF THE PAGE BSMI Notice (Taiwan Only) RETURN TO TOP OF THE PAGE Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen"...
  • Page 23 Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
  • Page 24 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "G" or by the Ground symbol AND YELLOW. 2. The BLUE wire must be connected to the terminal which is marked with the letter "N"...
  • Page 25 Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.

  • Page 26: Other Related Information

    Other Related Information Safety and Troubleshooting FAQs Troubleshooting Information for Users in the U. S. Regulatory Information Information For units set at 115 V : for Users in the U.S Information Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.

  • Page 27: About This Manual

    Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version.
  • Page 28 RETURN TO TOP OF THE PAGE ©2007 Koninklijke Philips Electronics NV All rights reserved. Reproduction, copying, use, modification, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics NV...

  • Page 29: Product Information

    Your LCD Monitor Product Information Product Features Smartimage Your LCD monitor SmartContrast SmartSaturte Congratulations on your purchase and welcome to Philips. To fully benefit from the support that Philips offers, register your product at. www.philips.com/welcome SmartSharpness Lead-free Product Product Features Technical Specifications 220CW8 Resolution &...
  • Page 30 How does it work? SmartImage – software based on Philips award-winning LightFrame™ technology – analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the contrast, color saturation and sharpness of images and video for ultimate display performance – all in real time with the press on a single button.
  • Page 31 No optimization by SmartImage. SmartResponse What is it? SmartResponse is exclusive Philips technology that adjusts response time to application requirements, delivering faster response time for gaming and videos or better color saturation for viewing photos and static images. Why do I need it? You want optimal display for every type of application: Static or steady image display without “noise”...
  • Page 32 RETURN TO TOP OF THE PAGE SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds.

  • Page 33: Lead-Free Product

    RETURN TO TOP OF THE PAGE Lead-free Product Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment.
  • Page 34 473.8 x296.1 mm Effective viewing area SCANNING Vertical refresh rate 56 Hz-76 Hz Horizontal Frequency 30 kHz - 93 kHz VIDEO 165 MHz Video dot rate Input impedance - Video 75 ohm - Sync 2.2K ohm 0.7 Vpp Input signal levels Separate sync Composite sync Sync input signal...

  • Page 35: Automatic Powersaving

    Resolution & Preset Modes A. Maximum Resolution For 220CW8 1680x1050 at 60 Hz (analog input) 1680x1050 at 60 Hz (digital input) * selected countries B. Recommended Resolution For 220CW8 1680x1050 at 60 Hz 18 factory preset modes: H. freq (kHz) Resolution 31.47 640*350...

  • Page 36: Physical Specifications

    1.The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table: Signal Assignment Signal Assignment V-sync Power Used color < 50W (typ.) Green < 1 W Amber < 1W ® PHILIPS artner, ® guidelines for energy efficiency. Signal Assignment...
  • Page 37 T.M.D.S. Data1- T.M.D.S. Data2- T.M.D.S. Data2+ T.M.D.S. Data1+ T.M.D.S. Data2/4 Shield T.M.D.S. Data1/3 Shield No connect No connect No connect No connect DDC Clock +5V Power DDC Data Ground (for +5V) No connect Hot Plug Detect 2.The 15-pin D-sub connector (male) of the signal cable: Assignment Pin No.

  • Page 38: Product Views

    RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function Tilt RETURN TO TOP OF THE PAGE...

  • Page 39: Philips' Flat Panel Monitors Pixel Defect Policy

    TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can Pin Assignment guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains Product Views the different types of pixel defects and defines acceptable defect levels for each type.
  • Page 40 Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel)
  • Page 41 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
  • Page 42 Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect Your Philips monitor is ISO13406-2 Compliant RETURN TO TOP OF THE PAGE...
  • Page 43 Thus, Philips provide you a compact version of SmartManage, SmartManage Lite. You can use SmartManage Lite to manage your Philips Monitors via LAN. Please. refer to below comparison chart and determine if which one suit for your environment best.

  • Page 44: Installation

    SmartManage Features and Benefits The Philips SmartManage is a working console for IT management to gather monitors assets information, run asset report, control assets security, monitor assets security, and issue instant messages to monitor users. Philips SmartManage includes the following major features: Provides an additional security measure that helps corporate users safeguard their investment.
  • Page 45 2. Installer – Install Shield Legal Choose "I accept" for installation process. ● Cancel prompts user if you want to cancel installation. ●...
  • Page 46 3. Installer – Install Shield Program Files Check the box if you wants to install SmartManage Lite Asset Management services. ● Personal user usually not need to active this function.Read SmartManage section in this manual before you choose SmartManage Lite function...
  • Page 47 4. Installer – Installation Process Follow the instruction and complete the installation. ● You can launch after installation complete. ● If you want to launch later, you can either click the shortcut on desktop or toolbar. ●...

  • Page 50: Start To Use

    Start to use: 1. First launch –Wizard The first time after installation of SmartControl II, it will automatically go to Wizard for first time launch. ● The wizard will guide you through adjustment your monitor performance step by step. ● You can go to Plug-in menu to launch wizard later on as well.
  • Page 51 2. Start with Standard pane: Adjust menu: Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. ● You can follow the instruction and do the adjustment. ● Cancel prompts user if you want to cancel installation. ● Tab Heading Sub Menu Adjust...
  • Page 52 Color menu: Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and ● SmartImage (Please refer to SmartImage section). You can follow the instruction and do the adjustment. ● Refer to below table for sub-menu item base on your input. ●...
  • Page 53 Optional Menu Option Menu let you to activate some features like AutoPivot, Preference, Input Selection and Audio ● Function. You can follow the instruction and do the adjustment. ● Refer to below table for sub-menu item base on your input. ●...
  • Page 54 Help Menu will give you some information of Manual, Update, ID, System ID and ● version. If you ask for technical support. It will automatically generate a report for Philips ● supporting to understand your enviorment by click "Tech. Support".
  • Page 55 PIP, Zoning, Asset Management and Theft Deterrence will only available and shown if the product supports those features Theft Deterrence Philips Theft Deterrence minimizes theft or unauthorized relocation of your display. Theft Deterrence does not prevent the display from being stolen, but hinders the operation of the display once it is removed from the “Theft Deterrence enabled”...
  • Page 56 Example for on line register Theft Deterrence PIN...
  • Page 57 Install the driver. Remove SmartControl, and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported. Please pay attention to Philips web site for any updated SmartControl driver available.
  • Page 58 In a monitor with the Smartlmage feature, the sRGB scheme of color temperature function in SmartControl is not responding, why? When Smartlmage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable Smartlmage with the button at the front bezel of your monitor.

  • Page 59: Installing Your Lcd Monitor

    Installing Your LCD Monitor Front View Produt Description Connecting to Your PC Front View Product Description The Base SmartAccessory Getting Started Optimizing Performance Input 220CW To switch monitor's power On and Off To access OSD menu To adjust the OSD menu To adjust brightness of the display To change the signal input source.

  • Page 60: Optimizing Performance

    Rear View USB downstream port AC power input DVI-D input (Available for selected countries) VGA input USB upstream port Kensington anti-thief lock RETURN TO TOP OF THE PAGE Optimizing Performance For best performance, ensure that your display settings are set at 1680x1050, 60Hz. ●...
  • Page 61 Note: You can check the current display settings by pressing the 'OK' button once. The current display mode is shown in OSD main controls called RESOLUTION. RETURN TO TOP OF THE PAGE...

  • Page 62: Connecting To Your Pc

    Connecting to Your PC Front View Product Description Accessory Pack Accessory Pack Unpack all the parts. Connecting to Your PC Getting Started Optimizing Performance The base Connecting to Your PC USB cable Power cord EDFU pack VGA cable RETURN TO TOP OF THE PAGE...
  • Page 63 Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. Connect to PC...
  • Page 64 Turn off your computer and unplug its power cable. Connect the monitor signal cable to the video connector on the back of your computer. Plug the power cord of your computer and your monitor into a nearby outlet. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
  • Page 65 The Base Front View Product Description Attach and Detach the Base Accessory Pack Attach the Base Connecting to your PC Getting Started Place the base on flat surface, slide the monitor body onto the base. Optimizing Performance Attach the Base Detach the Base Install cable cover as illustrated below.
  • Page 66 Detach the Base Detach Remove the cable cover as illustrated below.
  • Page 67 Place the monitor face on a safe surface, push down on the release button and pull the base away from the monitor body. SmartAccessory...
  • Page 68 SmartAccessory items (Smart Clip, Pen holder SmartAccessory, MP3/Phone holder SmartAccessory,) are no covered by Philips warranty. Items on SmartAccessory holder should not exceed 300g. RETURN TO TOP OF THE PAGE...

  • Page 69: Your Lcd Monitor

    Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vista or later Optimizing Performance The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP/Vista. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows®...
  • Page 70 Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. Double click on the 'Display' Icon. Select the 'Settings' tab then click on 'Advanced...'. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
  • Page 71 Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive). Click on the 'Open' button, then click the 'OK' button. Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed Windows®...

  • Page 72: Description Of The On Screen Display

    Description of the On Screen Display What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
  • Page 73 The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
  • Page 74 Resolution notification This monitor is designed for optimal performance at its native resolution, 1680X1050@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1680x1050@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
  • Page 75 Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria Belgium Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom EASTERN EUROPE: Czech Republic Hungary Poland Russia Slovakia Slovenia Turkey LATIN AMERICA: Antilles Argentina Brasil Chile Colombia Mexico Paraguay Peru Uruguay Venezuela...

  • Page 76: Your Philips F1Rst Choice Warranty

    Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective. Philips aims at a swap within 48 hours of your call being received.
  • Page 77 Note that products that are not originally designed, manufactured, approved and/or ● authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.

  • Page 79: F1Rst Choice Contact Information

    F1rst Choice Contact Information Country Code Telephone number Austria 0810 000206 Belgium 078 250851 Denmark 3525 8761 Finland +358 09 2290 1908 France 082161 1658 Germany 01803 386 853 Greece 00800 3122 1223 Ireland +353 01 601 1161 Italy 840 320 041 Luxembourg +352 26 84 30 00...

  • Page 80: Your Guarantee In Central And Eastern Europe

    Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase.
  • Page 81 In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting our dealers or Information Centers In case your Philips product is not working correctly or is defective, please contact your Philips dealer or directly the...

  • Page 82: Consumer Information Centers

    Consumer Information Centers Antilles Argentina Australia Bangladesh Brasil Canada Chile China Colombia Belarus Bulgaria Croatia Czech Republic Estonia Dubai Hong Kong Hungary India Indonesia Korea Latvia Lithuania Malaysia Mexico Morocco New Zealand Pakistan Paraguay Peru Philippines Poland Romania Russia Serbia & Montenegro Singapore Slovakia Slovenia South Africa Taiwan Thailand Turkey Ukraine Uruguay Venezuela Eastern Europe BELARUS...
  • Page 83 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu LATVIA ServiceNet LV Jelgavas iela 36 LV - 1055 Riga, Tel: +371 7460399 Email: serviss@servicenet.lv LITHUANIA...
  • Page 84 Email: servis@pchand.si POLAND Zolter ul.Zytnia 1 PL - 05-500 Piaseczno Tel: +48 22 7501766 Email: servmonitor@zolter.com.pl www.zolter.com.pl RUSSIA Tel: +7 095 961-1111 Tel: 8-800-200-0880 Website: www.philips.ru TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02...
  • Page 85 Philips Antillana N.V. Vedia 3892 Capital Federal CP: 1430 Buenos Aires Phone/Fax: (011)-4544 2047 BRASIL Philips da Amazônia Ind. Elet. Ltda. Rua Verbo Divino, 1400-São Paulo-SP CEP-04719-002 Phones: 11 21210203 -São Paulo & 0800-701-0203-Other Regions without São Paulo City CHILE Philips Chilena S.A.
  • Page 86 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr. 104-33 Bogota, Colombia Phone:(01)-8000 111001 (toll free) Fax : (01)-619-4300/619-4104 MEXICO Consumer Information Centre Norte 45 No.669 Col. Industrial Vallejo C.P.02300, -Mexico, D.F. Phone: (05)-3687788 / 9180050462 Fax : (05)-7284272 PARAGUAY Av.
  • Page 87 Rambla O'Higgins 5303 Montevideo Uruguay Phone: (598) 619 66 66 Fax: (598) 619 77 77 Customer Desk: Phone: 0004054176 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Philips Electronics Ltd.
  • Page 88 Rm 1007, Hongyun Building, No. 501 Wuning road, 200063 Shanghai P.R. China Phone: 4008 800 008 Fax: 21-52710058 HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A, 10/F. Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T.
  • Page 89 Madras 600 006 NEW DELHI Customer Relation Centre 68, Shivaji Marg New Dehli 110 015 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 ext: 2100 Fax : (021)-794 7511 / 794 7539...
  • Page 90 E-mail: care@philips.com Website: www.philips.com.pk PHILIPPINES PHILIPS ELECTRONICS & LIGHTING, INC. Consumer Electronics 48F PBCOM tower 6795 Ayala Avenue cor VA Rufino St. Salcedo Village 1227 Makati City, PHILS Phone: (02)-888 0572, Domestic Toll Free: 1-800-10-PHILIPS or 1-800-10-744 5477 Fax: (02)-888 0571...
  • Page 91 SINGAPORE Accord Customer Care Solutions Ltd Authorized Philips Service Center Consumer Service 620A Lorong 1 Toa Rayoh Singapore 319762 Tel: +65 6882 3999 Fax: +65 6250 8037 TAIWAN Philips Taiwan Ltd. Consumer Information Centre 13F, No. 3-1 Yuan Qu St., Nan Gang Dist.,...
  • Page 92 SOUTH AFRICA PHILIPS SA (PTY) LTD Customer Care Center 195 Main Road Martindale, Johannesburg P.O. box 58088 Newville 2114 Telephone: +27 (0) 11 471 5194 Fax: +27 (0) 11 471 5123 E-mail: customercare.za@philips.com Middle East DUBAI Philips Middle East B.V.

  • Page 93: Your International Guarantee

    In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.

  • Page 95: Who Is Covered

    Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase.
  • Page 96 Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 97 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 98 ● Just a phone call away Philips customer help desks are located worldwide. Within the U.S. you can contact Philips customer care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from 10:00 AM-5:00 PM ET hrs by using one of the contact phone numbers.
  • Page 99 Glossary A B C D E G H I R S T U V W X Y Z Active matrix This is a kind of liquid crystal display structure in which switching transistors are attached to each pixel to control the on/off voltage. It produces a brighter and sharper display with a broader viewing angle than a passive matrix display.
  • Page 100 (degrees Kelvin). Lower Kelvin temperatures such as 2400° K are red; higher temperatures such as 9300° K are blue. Neutral temperature is white, at 6504° K. Philips monitors generally offers 9300° K, 6500° K, and user define. Contrast...
  • Page 101 Contrast ratio The ratio of luminance between the brightest white pattern and the darkest black pattern. RETURN TO TOP OF THE PAGE D-SUB A VGA Analog input connector. Your monitor comes with a D-Sub cable. Digital Visual Interface (DVI) The Digital Visual Interface (DVI) specification provides a high-speed digital connection for visual data types that is display technology independent.
  • Page 102 promotes the manufacture and marketing of energy-efficient office automation equipment. Companies joining this program, must be willing to commit themselves to manufacture one or more products capable of going into a low -power state (< 30 W) either after a period of inactivity, or after a predetermined time selected by the user.
  • Page 103 A technique of improving the viewing angle of an LCD where the liquid crystal molecules are switched in the plane of the LCD layer rather than vertical to it. LCD (liquid crystal display) A display composed of liquid crystal suspended between two transparent sheets. The display is composed thousands of pixels which can be turned on or off with electrical stimulation.
  • Page 104 Microsoft’s already high Vista requirements from each and every monitor that leaves the factory–not just a few review samples. Only Philips goes to these lengths to deliver this exacting level of color accuracy and display quality in every new monitor.
  • Page 105 Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
  • Page 106 Glossary either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K. Other: USB plug: An upstream and a downstream USB plug is provide for user's convenience. TFT(thin film transistor) Usually made from amorphous silicon (a-Si) and used as a switch to a charge storage device located below each sub-pixel on an active matrix LCD.
  • Page 107 Hubs are wiring concentrators and enable the multiple attachment characteristics of USB. Attachment points are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The architecture supports concatenation of multiple hubs. The upstream port of a hub connects the hub towards the host. Each of the other downstream ports of a hub allows connection to another hub or function.
  • Page 108 The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic. Upstream The direction of data flow towards the host.

  • Page 109: Download And Print

    Download and Print Installing your LCD monitor driver Download and Printing Installing Your LCD monitor driver Instructions System requirements: PC running Windows 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP, ● Windows® Vista or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ ●...
  • Page 110 Printing instructions: To print the manual: With the manual file open, follow your printer's instructions and print the pages you need. RETURN TO TOP OF THE PAGE...

This manual is also suitable for:

220cw8fb/00220cw8fb190cw8220cw8

Table of Contents