Once The Cleaning Function Has Ended; Cleaning Agent; Suitable Cleaning Agents - Siemens HM676G0.1 Instruction Manual

Once the cleaning function has ended

Once the cooking compartment has cooled down, wipe
off the ash that has been left behind in the cooking
compartment, in the accessories, on the shelves and
around the appliance door with a damp cloth.
After cleaning, the rails may retain some discolouration.
This does not affect their operation. Wipe the rails with a
damp cloth. Then slide the rails in and out several
times.
During cleaning, the frame on the inside of the
appliance door may discolour. This is normal and does
not affect operation. The discolouration can only be
removed using a stainless-steel cleaning agent.
DCleaning agent
With good care and cleaning, your appliance will retain
C l e a n i n g a g e n t
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.

Suitable cleaning agents

To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Depending on the appliance
model, not all of the areas listed may be on/in your
appliance.
Caution!
Risk of surface damage
Do not use:
Harsh or abrasive cleaning agents,
■
Cleaning agents with a high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners,
■
Special cleaners for cleaning the appliance while it is
■
hot.
Wash new sponge cloths thoroughly before use.
Highly recommended cleaning and care products
Tip:
can be purchased through the after-sales service.
Observe the respective manufacturer's instructions.
:
Warning
Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Area Cleaning
Appliance exterior
Stainless steel Hot soapy water:
front Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Plastic Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Painted surfaces Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Control panel Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Door panels Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
Do not use a glass scraper or a stainless steel
scouring pad.
Door handle Hot soapy water:
Clean with a dish cloth and then dry with a soft
cloth.
If descaler comes into contact with the door han-
dle, wipe it off immediately. Otherwise, any stains
will not be able to be removed.
Appliance exterior
Enamel surfaces Hot soapy water or a vinegar solution:
Clean with a dish cloth and then dry with a soft
cloth.
Soften baked-on food residues with a damp cloth
and soapy water. If there are heavy deposits of
dirt, use a stainless steel scouring pad or oven
cleaner.
Leave the cooking compartment open to dry after
cleaning.
It is best to use the cleaning function.
~ "Cleaning function" on page 20
Glass cover for Hot soapy water:
the interior light- Clean with a dish cloth and then dry with a soft
ing cloth.
If the cooking compartment is heavily soiled, use
oven cleaner.
Stainless steel Stainless steel cleaner:
door cover Observe the manufacturer's instructions.
Do not use stainless steel care products.
Remove the door cover for cleaning.
Stainless steel Stainless steel cleaner:
interior door Observe the manufacturer's instructions.
frame
This can be used to remove discolouration.
Do not use stainless steel care products.
Cleaning agent en
21