Battery Terminal Disconnection and Reconnection
Disconnection
NOTE: Some systems store data in memory (including
seat position, mirror position, etc) that is lost when the
battery is disconnected. Do the following procedures
before disconnecting the battery.
1. Make sure you have the anti-theft code(s) for the
audio system.
2. Make sure the ignition switch is in LOCK (0).
3. Disconnect and isolate the negative cable from the
battery.
NOTE: Always disconnect the negative cable from the
battery first.
4. Disconnect the positive cable from the battery.
Reconnection
NOTE: Some systems store data in memory (including
seat position, mirror position, etc) that is lost when the
battery is disconnected. Do the following procedures to
restore the systems back to normal operation.
1. Clean the battery terminals.
2. Test the battery; refer to the appropriate Odyssey
Service Manual.
3. Reconnect the positive cable (A) to the battery (B) first,
then reconnect the negative cable (C) to the battery.
NOTE: Always connect the positive cable to the
battery first.
A
2.9-5.9 N·m
(0.30-0.60 kgf·m, 2.1-4.4 lbf·ft)
B
4. Apply multipurpose grease to the terminals to
prevent corrosion.
5. Enter the anti-theft code(s) for the audio system.
6. Enter the audio presets.
7. Set the clock (for vehicles without navigation).
C
1-5