Additional Documentation; Hardware Preparation; Installing Batteries And Attaching The Tether; Technical Support - Socket 7 series Quick Start Manual

Cordless hand scanner series 7 with bluetooth wireless technology

Hide thumbs Also See for 7 series:

Table of Contents

Enlarged version

Additional Documentation

This Quick Start Guide contains only the most basic setup instructions for the

Socket Cordless Hand Scanner. For more complete information, please refer to the

User's Guide, available in the Docs folder of the installation CD and online at:

www.socketmobile.com/support/downloads/data-collection/series9/

An Advanced Programming Guide is also available at the link above.

In the Socket software, the abbreviation "CS" refers to both the Socket Cordless

Ring Scanner and Socket Cordless Hand Scanner. Please be aware that the products

described in this manual may change without notice.

If you have trouble installing or using the CHS, contact Socket technical support by

first registering your product at www.socketmobile.com/support/support/new/.

After product registration, log in, click on the Technical Support tab, and click

Create New Ticket to submit an online request for technical support.

Afterwards, you can log in anytime to track the progress of your request. If we are

unable to resolve your support inquiry online, we can arrange for a technical support

representative to call you at a specific time.

ARDWARE

REPARATION

1. Use a coin or screwdriver to unlock and remove the battery cover. Turn the lock

underneath the scanner to a horizontal position. Remove the casing.

2. Install the batteries in opposite directions, as indicated by the positive symbols.

WARNING: Do not install the batteries incorrectly. Damage may result.

3. If desired, attach the tether. Wrap the loop of

string around the inside part of the lock.

4. Replace the battery cover and lock it into place.

5. If desired, attach the tether to a lanyard or belt.

Table of Contents