Symbols - Ryobi WS722 Operator's Manual

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye, Ear, & Breathing
Protection
Wet Conditions Alert
No Hands Symbol
Electrocution
V Volts
A Amperes
Hz Hertz
min Minutes
Alternating Current
n o No Load Speed
.../min Per Minute

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand opera-
tor's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1 along with hearing and breathing protection.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the wheel will result in
serious personal injury.
Failure to properly ground can result in electrocution.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
4 — English
DESIGNATION/EXPLANATION