Pfaff Creative Sensation Pro II Owner's Manual page 47

In the Settings menu, you can change default settings
and make manual adjustments to the machine
settings (A), screen and light settings (B) and sound
settings (C).
Touch the icons to activate a function or open a list
of choices. The settings are saved even after turning
off the machine with two exceptions: Dynamic spring
foot 6D is always active at power on, and for Options
for feed dogs the default setting is auto.
Use Quick help to receive instant information about
the settings. Touch the Quick help icon (D) and then
the setting you want information about. Read more
about Quick Help on page 3:16.
Touch the icon to view the available languages. Select
your desired language from the list by touching it.
Owner's name
Touch the icon to get a pop-up where you can enter
your name.
Thread manufacturer
Touch to select preferred thread manufacturer. You
can select between Gütermann Sulky and Robison-
Anton. Color codes from the selected manufacturer
will be used when changing colors in a design, or
creating a new design from stitches or fonts in your
machine.
Note: Changing thread manufacturer setting will not
automatically convert the colors in existing designs to the
selected thread manufacturer.
Twin needle
Touch the icon to open a list for twin needle width
selections. When a twin needle size is selected, the
width of all stitches is limited for that needle size to
prevent needle breakage. The setting is kept until
you deselect the twin needle width.
When a twin needle size is selected, a pop-up is
shown when turning on your machine. The stitch
width of the selected stitch will automatically be
that is too wide for the twin needle size, a waring
pop-up will appear. Select "off" in the twin needle
list to deselect twin needle and go back to normal
sewing.
Pop-up for twin
needle selection.
A B C D
3:9