Honda 08E91-E22-100B Installation Instructions Manual page 15

51. Plug the engine starter harness 4-pin and 2-pin
connectors into the fuse box.
NOTICE
Check that the engine starter harness 4-pin and
2-pin connectors are connected to the fuse box and
they are locked securely. Loose connectors can
cause engine stall.
4-PIN
2-PIN
CONNECTOR
CONNECTOR
PORT
PORT
VEHICLE
4-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
4-PIN
CONNECTOR
ENGINE
STARTER
HARNESS
2-PIN
CONNECTOR
52. Wrap foam cushion tape to the vehicle 2-pin and
4-pin connectors and secure them with one wire tie.
Then, secure the vehicle harness with one wire tie.
Reconnect the vehicle 42-pin connector.
© 2009 American Honda Motor Co., Inc. – All Rights Reserved.
FOAM
CUSHION
VEHICLE
TAPE
HARNESS
WIRE TIE
VEHICLE 2-PIN
CONNECTOR
FUSE
BOX
Pull the connector
and check for
872640AT
securely locking.
53. Connect the engine starter harness 23-pin
connectors with each other and secure them with
one wire tie to the vehicle harness.
54. Unplug the white vehicle 14-pin connector at the
front lower pillar behind the fuse box, and plug the
engine starter harness 14-pin connectors in
between. Attach the engine starter harness 14-pin
connector to the vehicle 14-pin connector.
FUSE BOX
AII 42460 (0908)
WIRE TIE
VEHICLE 14-PIN
CONNECTOR
(White)
ENGINE
STARTER
HARNESS
14-PIN
CONNECTOR
VEHICLE 14-PIN
CONNECTOR (White)
ENGINE
STARTER
HARNESS
23-PIN
CONNECTOR
(blue)
VEHICLE
HARNESS
872641AT
872642AT
15 of 21