Table of Contents
Advertisement
1
6.3 FIRMWARE UPDATE
A
UPDATE PROCEDURE
1)
APPLICATION UPDATE
1.
Plug a power cable into the unit.
2. Press the "STANDBY/ON" button to switch the unit on.
3. Press the "OPEN/CLOSE" button to open the disctray.
4.
Place an application UPDATE disc on the tray.
5.
Press the "OPEN/CLOSE" button on the front panel to begin the application update.
B
* FL display indicates "DL OK" and the unitauto matically switches into standby with the tray
opening.
* The update time takes 5 to 25 minutes, it changes depending on the version.
DO NOT unplug the power cable or press the standby button until
the unit switches into standby mode.
C
6.
Remove the application UPDATE disc from the tray.
7.
Press the "STANDBY/ON" button to switch the unit on, and check if FL display indicates "DL OK".
The updato is completed if FL display indicatates "DL OK".
D
E
F
70
1
2
BDP-HD1
2
3
3
4
4
Advertisement
Table of Contents
