Table of Contents
Advertisement
1
How to Input the ID Number and ID Data
A
1
To enter the input mode, press ESC + STEREO keys
sequentially in a status with no ID number set, such as after
FLASH-ROM downloading.
2
As number input is enabled when the unit enters the input
mode, input the 9-digit ID number.
(The entered number is also displayed on the FL display.)
[Player's ID Number Setting]
ID Number ?
B
> - - - - - - - - -
2
<CLEAR> Exit
<SEARCH> Enter
Input ID Number !
3
After inputting the number, press SEARCH keys to register the
C
ID number. (SEARCH key is not accepted until 9 digits are
entered.)
[Player's ID Number Setting]
ID Number ?
> 0 0 0 0 0 0 0 0 1
<CLEAR> Exit
<SEARCH> Enter
3
Input ID Number !
D
4
When the ID number has been registered, the unit enters the ID
data input mode.
In this condition, place the ID data disc on the tray and close the
tray using the CLOSE key "7/0" on the player.
[Player's ID Data Setting]
<CLEAR> Exit
E
Insert The ID Data Disc !
4
F
68
1
2
5
While the data are being read, no indication is displayed (black
screen) .
5
6
When the ID data have been written to the FLASH-ROM, the
message "Rom Write OK" is displayed on the screen.
(The FL display indicates "ID OK.")
After confirming this message, press CLEAR key to exit the
7
input mode.
6
BDP-HD1
2
3
Rom Write OK !
3
4
4
Advertisement
Table of Contents
