Id Number And Data Setting - Pioneer BDP-HD1 Service Manual

5

6.2 ID NUMBER AND DATA SETTING

[Purposes]
• An individual ID number and ID data (AACS, CPRM, BD+, Windows Media DRM, and MAC address)
must be input at the same time. All data are determined according to the data on the ID data disc. If the
number and data are not set correctly with the following procedure, the unit does not work properly.
You will find the ID number to be labeled on the rear panel.
This setting is Necessary When:
• When the DRIVE Assy or MAIN Assy is replaced.
[Tools to be used]
Remote control unit for servicing
Important: If no ID label is found on the rear panel, write down the specified ID number by checking it
[Notes]
• Input the ID number while the unit is in Stop mode.
• After the data are read from the ID data disc, the disc will automatically be unloaded.
• Each time a key input succeeds, the screen background becomes blue. If a key input fails, the screen
background becomes red.
5
6
ID Disc for Blu-ray Player
(GGF1381)
on the version check screen ([ESC] + [DISP]).
6
7
(GGV1306)
BDP-HD1
7
8
A
B
C
D
E
F
67
8