Refitting The Flywheel Cover Components - PIAGGIO 2005 XEVO 400ie Workshop Manual

XEVO 400ie
- Install the wiring guide bracket tightening the 2
screws to the prescribed torque.
Locking torques (N*m)
Stator cable harness guide bracket screws

Refitting the flywheel cover components

- Before reassembling, check that all components
are perfectly clean.
- For the cover, carefully check all lubrication chan-
nels, in particular:
- The 3 by-pass channels.
- Oil pressure sensor feeding duct.
- Oil vapour decantation chamber
3 - 4
Engine
ENG - 103