Assembling The Mower; Delivery Checklist; Handlebar; Grassbag Assembly - Hayter Harrier 48 BBC Owner's Handbook Manual

ASSEMBLING THE MOWER

Delivery Checklist

56CTH04A

Grassbag Assembly

2
1
B
1.12
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Grassbag.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.

Handlebar

Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the engine stop lever away from the engine to avoid
damage and unfold the handlebar to the operating position.
Make sure the knobs are assembled to the outside of the hanadlebar and
tighten to secure into position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
A
D
C
HAY-G00114-A
Raise the rear deflector, lower the grassbag and hook in position.
Lower the deflector to rest on the grassbag.
56CTH03B
Before first use, assemble the grassbag and
frame.
Slide the frame (1) into the grassbag (2), ensuring
that the handle is above the grassbag as shown.
Attach plastic clips (A), (B), (C) and (D) to the
grassbag frame.