Snc Easy Ip Setup Function - Sony IPELA Easy Setup Manual

1
Start SNC easy IP setup.
The network cameras connected to the local
network are detected and listed on the main screen.
Note
The message "User Account Control - An
unidentified program wants access to your
computer" may appear. In this case, click "Allow".
2
Set the IP address.
Select the camera from the list, then set the IP
address.
Tip
The factory setting of the camera network is DHCP
mode for both LAN and Wireless LAN.
To specify the IP address manually:
Select Use the following IP address, and type the
IP address, Subnet mask and Default gateway in
the relevant boxes.
To obtain the IP address automatically from a
DHCP server:
Select Obtain IP address automatically.
Note
When you select Obtain IP address
automatically, make sure that the DHCP server is
operating on the network.
4
Assigning the IP Address to the Camera
3
Set the DNS server address.
To obtain the DNS server addresses
automatically:
Select Obtain DNS server address automatically.
To specify the DNS server addresses manually:
Select Use the following DNS server address, and
type the Primary DNS server address and
Secondary DNS server address in the relevant
boxes.
4
Set the HTTP port No.
Normally, select 80 for the HTTP port No. To use
another port number, type a port number between
1024 and 65534 in the text box.
5
Enter the administrator name and password.
The factory settings for both items are "admin".
Note
The setting is not available for other users except
Administrator, which is registered on the camera
setting screen.
6
Confirm that all items are correctly set, then click
Set.
If "Setting OK" is displayed, the IP address is
correctly assigned.
7
When setting is finished, to access the camera
directly, double-click the device name in the list.
The viewer screen of the network camera is
displayed on the Web browser.
Note
If the IP address is not set correctly, the viewer does not
appear after step 7. In that case, set the IP address again.

SNC easy IP setup function

Software screen configuration