2.
Push the tilt lock lever down to release it.
3.
Pull up the shallow water lever.
4.
Slightly tilt the outboard motor up. The
tilt support bar will lock automatically,
supporting the outboard motor in a par-
tially raised position. This outboard mo-
tor has 2 positions for shallow water
cruising.
5.
To return the outboard motor to the nor-
mal running position, place the tilt lock
N
ZMU04117
ZMU03746
ZMU03728
lever and shallow water lever to the lock
position.
6.
Slightly tilt the outboard motor up until
the tilt support bar automatically returns
to the free position.
7.
Slowly lower the outboard motor to the
normal position.
EMU28194
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter and, if possible, rinse the power head un-
der the cowling.
Cruising in muddy, turbid, or acidic water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(see page 13) if you use the outboard motor
in acidic water or water with a lot of sediment
Operation
ZMU03729
ZMU03731
46