How To Adjust The Automatic Ice Maker; Water Supply - Daewoo FRAQ19DC Series Operating Instructions Manual

How to adjust the
automatic ice maker water
supply
Please ensure that water supply is adjusted to make
the appropriate sized ice (80~85% of ice tray)
If the ice is too small or too large, ice-making and ice-
tranferring malfunctions may occur.
Before adjusting water supply, proper water supply
should be measured according to the water pressure
of the house which the refrigerator is installed
■
Proper water supply measurement and
control methods
1. After the initial power on, press 'dispenser' button
to change to the mode of 'WATER'
2. Press the water dispenser lever to receive more
than 1 to 2 cups.
3. Press the LOCK button.
4. Change of water supply adjustment mode : Press
the 'Dispenser' button for approximately 10
seconds
• The initial predetermined value of water supply is
'5'
5. Push the dispenser lever and receive water until it
stops.
6. Pour the water received in a cup to the water
supply measuremet cover in order to determine
the proper water supply compared to the water
pressure.
• If the water is filled as shown in the picture below,
water supply is proper.
- Minimum proper water supply
Half filled
- Maximum proper water supply
Fully filled
Fully filled
Fully filled
15