Intermec CN51 Frequently Asked Questions Manual page 7

Q: Is there a workboard printer option for the CN51?
A: No, there is not a workboard printer option for the CN51.
Q: What is the difference between the Vehicle Dock and Vehicle
Holder?
A: The Vehicle Dock provides charging to the mobile computer
and data connectivity options. The Vehicle Holder uses the
same mechanical package as the dock, but provides neither
power nor data connectivity.
Q: What power options are available for the Vehicle Dock?
A: The HandEra Vehicle Dock uses the same power connector
as Vehicle Docks for CN50, CN3, CK3, CK61 and 700 Series.
Most of the same power kits used with those products may
also be used for the CN51. In addition, a new cable designed for
direct connection to 12-30V DC power ports found in some
newer vehicles, or the vehicle fuse block, is available.
Q: What connectivity options does the HandEra Vehicle Dock
provide?
A: The HandEra Vehicle Dock supports USB Host and RS232
connectivity. The RS232 port also provides +5V DC power on Pin
9 for operating handheld scanners and similar devices.
North America South Latin America
6001 36th Avenue West Brazil
Everett, Washington 98203 Phone: (+55) 11 3711 6770
Phone: (425) 348 2600 Fax: (+55) 11 5502 6780
Fax: (425) 355 9551
Europe, Middle East & Africa
North Latin America
Reading, United Kingdom
Mexico Phone: (+44) 118 923 0800
Phone: (+52) 55 52 41 48 00 Fax: (+44) 118 923 0801
Toll Free NOLA:
01800 490 4990 Asia Pacific
Singapore
Phone: (+65) 6303 2100
Fax: (+65) 6303 2199
Q: What mounting options are available for Vehicle Docks and
Holders?
A: The RAM mount specified in the Price Guide must be used
with the Vehicle Dock or Vehicle Holder to preserve the integrity
of the dock during all possible usage scenarios. Intermec does
not support the use of other mounting systems.
Q: Which accessories are compatible with Vehicle Docks and Holders?
A: Snap-on adapters (including MSR, RS232, and USB) and Scan
Handle are not compatible with the Vehicle Dock/Holder.
Q: Can the Vehicle Dock or Holder be used in a forklift application?
A: Yes, the Vehicle Dock/Holders are approved for use in forklift
environments. Use of the RAM mount specified in the Price
Guide is required.
Q: Must the snap-on adapters (including MSR, RS232, and USB)
be removed to dock or charge the CN51?
A: Yes, all snap-on adapter oprions must be removed in order to
dock or charge the CN51.
Media Sales Customer Service & Support
EMEA: (+31) 24 372 3167 Toll Free NA: (800) 755 5505
USA: (513) 874 5882 Toll in NA: (425) 356 1799
http://intermec.custhelp.com EMEA: intermec.custhelp.com
Sales Internet
Toll Free NA: (800) 934 3163 www.intermec.com
Toll in NA: (425) 348 2726
Worldwide Locations
Freephone ROW:
00800 4488 8844 www.intermec.com/locations
OEM Sales
Phone: (425) 348 2762
© 2013 Honeywell International Inc.
612308-A 09/13