Turning The Transceiver On; Display Layout; Figure 3 Display Layout - Raymarine AIS950 Installation Instructions Manual

Operation

3.2 Turning the transceiver on

The AIS950 transceiver does not have a power switch and is designed to be permanently powered. When
power is first applied the display will show the text 'Automatic Identification System' for 5 seconds before the
main operating screen is shown.

3.3 Display layout

The display layout is shown in Figure 3. All operating screens show the time, status bar, scroll indicators and
relevant function keys. The time displayed is UTC time.
When no UTC time is available from the internal GNSS module the time display will show --:--:-- in place of the
time of day.
UTC time
Main display area
Left function key
Figure 3 Display layout
3.3.1 Status bar icons
The status bar shows the current transceiver status using icons. The meaning of each icon is described in Table 1.
Icon
OK
Tx
Rx
INT
GPS
EXT
GPS
INT
DGPS
EXT
DGPS
NO
GPS
Page 12
HH:MM:SS
Selec t
Description
The transceiver is operating normally.
Shown for one second following each transmission.
Shown for one second following each received message.
Shown when the internal GPS receiver has a valid position
fix.
Shown when a connected external GPS receiver has a valid
position fix.
Shown when the internal GPS receiver has a valid differential
position fix.
Shown when a connected external GPS receiver has a valid
differential position fix.
Shown when there is no valid internal or external position fix.
Screen
Status bar
Scroll indicators
Right function key