Mitsubishi SRK90CL-BN Technical Manual page 19

No obstacles
(an enough open space)
CONCERNING TERMINAL CONNECTION FOR AN INTERFACE
Remove the air inlet panel, lid and front panel.
1
Remove the control cover. (Remove the screw.)
2
There is a terminal (respectively marked with CNS) for the indoor control board.
3
In connecting an interface, connect to the respective terminal securely with the connection harness supplied with an optional " Interface
connection kit SC-BIKN-E" and fasten the connection harness onto the indoor control box with the clamp supplied with the kit.
For more details, please refer to the user's manual of your "Interface connection kit SC-BIKN-E".
Screw (B)
• Outdoor unit dimensions
Model Hight × Width × Depth (cm)
SRC90 75.0 × 88.0 × 34.0
Latch
Air inlet panel
Air filter
Front panel
Screw (A)
Screw (A)
Screw (B)
Screw (B)
The screw of the
side cover is
tightened securely.
Control cover
Indoor unit PCB
Screw
CNS terminal
Approx. 80
To remove / To install