Operation Instructions - commercial cool WPAC08R series User Manual

SET UP & USE

OPERATION INSTRUCTIONS

COOL OPERATION
• Press the "MODE" button until the
"COOL" indicator light comes on
• Press the ADJUST buttons "
" " to select your desired room
temperature. The temperature
can be set within a range of
62°F-88°F/17°C-30°C.
• Press the "FAN SPEED" button to
choose the fan speed.
HEAT OPERATION
(Applicable to the models with heat
feature only)
• Press the "MODE" button until the
"HEAT" indicator light comes on
• Press the ADJUST buttons "
" " to select your desired room
temperature. The temperature can
be set within a range of 62°F-88°F
/17°C-30°C.
• Press the "FAN SPEED" button to
choose the fan speed. For some
models, the fan speed can not be
adjusted under HEAT mode.
DRY OPERATION
• Press the "MODE" button until the
"DRY" indicator light comes on.
• Under this mode, you cannot
select a fan speed or adjust the
temperature. The fan motor
operates at LOW speed.
• Keep window and door closed for
the best dehumidifying effect.
• Exhaust hose attachment is not
required in this mode.
NOTE: · Refer to Water Drainage
section page 17.
AUTO OPERATION
• When you set the air conditioner in
AUTO mode, it will automatically
select cooling, heating (cooling only
" or
for models without heat), or fan
only operation depending on the
temperature you have selected and
the room temperature.
• The air condition will control room
temperature automatically round
the temperature point set by you.
• Under AUTO mode, you can not
select the fan speed.
FAN OPERATION
• Press the "MODE" button until the
"FAN" indicator light comes on.
" or
• Press the "FAN SPEED" button
to choose the fan speed. The
temperature cannot be adjusted.
• Exhaust hose attachment is not
required in this mode.
SLEEP OPERATION
Press this button, the selected
temperature will increase (cooling) or
decrease (heating) by 2°F/1°C for the
first 30 minutes. The temperature will
then increase (cooling) or decrease
(heating) by another 2°F/1°C after
an additional 30 minutes. This new
temperature will be maintained for 7
hours before it returns to the originally
selected temperature. This ends the
SLEEP mode and the unit will continue
to operate as originally programmed.
NOTE: · This feature is not available under
FAN or DRY mode.
Page 15 Page 15