Control Panel - commercial cool WPAC08R series User Manual

SET UP & USE

CONTROL PANEL

AUTO COOL
DRY
FAN
Pictures are for illustration purpose only. Your model may or may not have all the features.
1. MODE SELECT BUTTON
Selects the appropriate operating
mode. Each time you press the button,
a mode is selected in the sequence that
goes from AUTO, COOL, DRY, FAN
and HEAT. The mode indicator light
illuminates under the different mode
settings.
NOTE: · Heat mode is only for models with
heat options
2. TIMER BUTTON
Used to initiate the AUTO ON start time
and AUTO OFF stop time program,
in conjunction with the
buttons.
3. POWER BUTTON
Power switch ON/OFF.
4. SLEEP BUTTON
Used to initiate the SLEEP operation.
5. FAN BUTTON
Control the fan speed. Press to select
the fan speed in four step - LOW, MED,
HI and AUTO. The fan speed indicator
light illuminates under different fan
settings except AUTO speed, all the fan
indicator lights turn dark.
9 6
SWING
TIMER ON
MODE
TIMER OFF
1 2
and
8 6
˚F ˚C
3
6. UP (
BUTTON
Used to adjust (increasing/decreasing)
temperature settings (2°F/1°C
increments) in a range of 62°F (17°C) to
88°F (30°C) or the TIMER setting in a
range of 0~24 hours.
NOTE: · The control is capable of displaying
temperature in degrees Fahrenheit
or degrees Celsius hold the UP and
Down buttons at the same time, for 3
seconds.
7. REMOTE SENSOR
Remote signal receptor accepts
commands from the remote control.
8. LED DISPLAY
Displays the set temperature in Celsius
or Fahrenheit. Displays Auto-timer
settings and while in DRY and FAN
modes displays room temperature.
9. SWING BUTTON
Used to stop or start louver movement
and set the desired up/down airflow
direction.
NOTE: · On models with auto swing function
only.
7
SLEEP FAN
4 5
)/DOWN(
HI
MED
LOW
)
Page 13