Page 1
OBJ_DOKU-8938-001.fm Page 1 Wednesday, December 5, 2007 12:01 PM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen EXACT www.boschproductiontools.com 2|4|6|7|8|9|12|60|212|402|412|459|610|700|908|1100|1106 3 609 929 B57 (2007.12) T / 445 de Originalbetriebsanleitung cs Původním návodem k používání Originali instrukcija en Original instructions sk Pôvodný...
Page 2
OBJ_BUCH-529-001.book Page 3 Wednesday, December 5, 2007 12:18 PM 3 609 929 B57 | (5.12.07) Bosch Power Tools...
Loose clothes, jewellery or long hair can Damaged or entangled cords increase the be caught in moving parts. risk of electric shock. Bosch Power Tools 3 609 929 B57 | (5.12.07)
If this situation is unavoid- formed. Use of the power tool for able, disconnect all fuses or circuit breakers operations different from those intended feeding this worksite. could result in a hazardous situation. 3 609 929 B57 | (5.12.07) Bosch Power Tools...
On/Off switch is in the off position be- fore inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. Bosch Power Tools 3 609 929 B57 | (5.12.07)
Max. torque for hard/soft screwdriving application according to ISO 5393 No-load speed n Rated voltage 12.0 Rotational direction Weight according to EPTA-Procedure 01/2003 Degree of protection IP 20 IP 20 IP 20 3 609 929 B57 | (5.12.07) Bosch Power Tools...
Page 9
... 373 ... 453 ... 659 ... 759 ... 374 ... 375 ... 454 ... 455 Number of cells Battery voltage 12.0 12.0 12.0 12.0 Capacity Weight according to EPTA-Procedure 01/2003 Bosch Power Tools 3 609 929 B57 | (5.12.07)
The noise level when working can exceed 80 dB(A). Wear hearing protection! Vibration total values (triax vector sum) deter- 28.09.2007, Robert Bosch GmbH, Power Tools Division mined according to EN 60745: D-70745 Leinfelden-Echterdingen Screwdriving without impact: Vibration emis- sion value a <2,5 m/s...
The service agent for charging process automatically stops when the Bosch power tools battery is fully charged. The charging procedure is over when the green LED indicator no longer No charging procedure possible flashes and lights up uniformly.
(LED indicator) must be the same as the tool shows red. voltage of the driver. The constant voltage regulator is suitable exclusively for Bosch Battery insertion/removal (see figure D) industrial battery-operated drivers of the Move the rotational direction switch 3 to the EXACT series, the ANGLE EXACT series, and center position.
3 since the power tool starts only when the rotational direction switch 3 is not in the middle position (switch-on lock). Bosch Power Tools 3 609 929 B57 | (5.12.07)
Always use the power tool with a marking ring to when it is switched off. Rotating tool inserts insure that the housing body is sealed from dust can slip off. and dirt. 3 609 929 B57 | (5.12.07) Bosch Power Tools...
Follow the solvent manufacturers directions for use and disposal. Repeat Protection Lubricate the gearbox using Bosch gearbox lube. Repeat the lubrication procedure every When the shut-off coupling responds for a 300 hours after the initial gearbox service.
Do not dispose of battery packs/batteries into household waste, fire or water. Battery packs/ Robert Bosch GmbH is responsible for the deliv- batteries should be collected, recycled or dis- ery of this product in accordance with the sales posed of in an environmental-friendly manner.