Adjustment Of Idling - Makita PM7650H Owner's And Safety Manual

2. Stopping
1) When the cruise control lever is a low-speed position.
Release the trigger lever to reduce the engine speed, and set the stop switch to
the "O" position.
2) When the cruise control lever (1) is except a low-speed position.
Set the cruise control lever to the low-speed position, reduce the engine speed,
and set the stop switch (2) to the "O" position.
High speed
Low speed
(1)

ADJUSTMENT OF IDLING

DANGER:
The carburetor is the adjustment being completed at the time of factory
shipment. Please do not adjust other than idling adjusting. When adjustment
becomes necessary, please consult your dealership or an authorized service
agent.
Checkup of low-speed rotation
Set the low-speed rotation to 2,800 min
• If it is necessary to change the rotation speed, regulate the adjusting screw, with
Phillips screwdriver.
• Turn the adjusting screw to the right, and the engine rotation will increase. Turn
the adjusting screw to the left, and the engine rotation will drop.
(2)
.
-1
16
Adjusting
screw
Carbureter