Http://Www.xiaoyu163.Com - Onkyo HT-R960 Service Manual

QQ
3 7 63 1515 0
IC BLOCK DIAGRAMS AND TERMINAL DESCRIPTIONS-22
Q8001 : FLI30502 (LCD TV Controller with Worldwide Standard Sound Processor
TERMINAL DESCRIPTION
Analog input port
Pin Name
BN
GNDA
SV3P
VDDA
A3P
VDDA
B3P
GNDA
C3P
GNDA
TE
L 13942296513 CN
GNDA
SV4P
GNDA
A4P
GNDA
B4P
GNDA
C4P
VDDA
SVN
VOUT2
www
.

http://www.xiaoyu163.com

and HDMI Receiver)-4/12
Pin # I/O Description
235 AI Negative analog input 'B' for channels 1 through 4. This acts as the return Path for the Sources
connected to channel-B Input. This has to be AC coupled using a series 57.6 resistor and 0.1 uF
Capacitor network to Analog Ground Plane on board.
236 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
237 AI Positive analog input for channel 3. The input has to be AC coupled using a series 20 resistor and
0.1uF Capacitor network.
238 AP Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog system
ground plane.
239 AI Positive analog input 'A' for channel 3. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
240 AP Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog system
ground plane.
241 AI Positive analog input 'B' for channel 3. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
242 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
243 AI Positive analog input 'C' for channel 3. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
244 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
245 AI Negative analog input 'C' for channels 1 through 4. This acts as the return Path for the Sources
connected to channel-B Input. This has to be AC coupled using a series 57.6 resistor and 0.1 uF
Capacitor network to Analog Ground Plane on board.
246 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
247 AI Positive analog input for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
248 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
249 Positive analog input 'A' for channel 4. The input has to be AC coupled using a series 20 resistor
AI
and 0.1uF Capacitor network.
250 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
251 AI Positive analog input 'B' for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
252 AG Analog Ground. Must be directly connected to the analog system ground plane on board.
253 AI Positive analog input 'C' for channel 4. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
254 AP Analog Power(3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog system
ground plane.
255 AI Negative analog SV input for channels 1 through 4. This acts as the return Path for the Sources
connected to SV channel inputs. This has to be AC coupled using a series 57.6 resistor and 0.1uF
Capacitor network to Analog Ground Plane on board.
256 AO Analog VOUT signal. This is the Analog Video Output from the selectable Composite and
S-video Inputs. This can be amplified and be any video display device.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
TX-SR606
9 9
9 9