Table of Contents

Advertisement

Available languages

Available languages

Quick Links

INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
NEVER LEAVE CHILDREN OR OTHER AT RISK INDIVIDUALS ALONE WITH THE APPLIANCE.
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS: CSA C22.2 No-46 / UL 1278
SAFETY INFORMATION
WARNING
!
If the information in these instructions are
not followed exactly, a fi re or explosion
may result causing property damage,
personal injury or loss of life.
- Do not store or use gasoline or other fl ammable
vapors and liquids in the vicinity of this or any
other appliance.
Phone (705)721-1212 • Fax (705)722-6031 • www.napoleonfi replaces.com •hearth@napoleonproducts.com
$10.00
INSTALLATION AND
OPERATING INSTRUCTIONS
EFL42S
ELECTRIC FIREPLACE
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada /
103 Miller Drive, Crittenden, Kentucky, USA, 41030
1.41A
W415-1142 / E / 07.13.15
EN
FR
PG
21

Advertisement

Table of Contents
loading

Summary of Contents for Napoleon EFL42S

  • Page 1 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky, USA, 41030 Phone (705)721-1212 • Fax (705)722-6031 • www.napoleonfi replaces.com •hearth@napoleonproducts.com 1.41A...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION DIMENSIONS LISTING APPROVALS GENERAL INSTRUCTIONS UNPACKING AND TESTING APPLIANCE LOCATING APPLIANCE GROUNDING APPLIANCE INSTALLATION MINIMUM CLEARANCE TO COMBUSTIBLES MINIMUM MANTEL CLEARANCES INSTALLING THE APPLIANCE RECESSING INSTALLATION 3.4.1 MINIMUM CLEARANCE TO COMBUSTIBLES 3.4.2 FRAMING 3.4.3 MOUNTING BRACKET INSTALLATION HARD WIRING INSTALLATION FINISHING GLASS DOOR REMOVAL...
  • Page 3: Introduction

    1.0 INTRODUCTION WARNING • Do not operate appliance before reading and understanding operating instructions. Failure to operate appliance according to operating instructions could cause fi re or injury. • Risk of burns. Power to the appliance should be turned off and the appliance allowed to cool before servicing.
  • Page 4: Dimensions

    This appliance has been tested in accordance with the CSA Standards for fi xed and location-dedicated electric room appliances in the United States and Canada. If you need assistance during installation, please contact your local dealer. Model Number EFL42S NOTE: This appliance must be electrically wired and grounded Description Wall-Mount...
  • Page 5: General Instructions

    GENERAL INSTRUCTIONS WARNING READ THESE INSTRUCTIONS COMPLETELY BEFORE BEGINNING INSTALLATION. FAILURE TO FOLLOW THEM COULD CAUSE AN APPLIANCE MALFUNCTION RESULTING IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. ALL ELECTRIC APPLIANCES HAVE HOT AND ARCING OR SPARKING PARTS INSIDE. DO NOT USE IT IN AREAS WHERE GASOLINE, PAINT OR FLAMMABLE LIQUIDS ARE PRESENT.
  • Page 6: Locating Appliance

    2.0 LOCATING APPLIANCE WARNING DUE TO HIGH TEMPERATURES, THIS ELECTRIC APPLIANCE SHOULD BE LOCATED OUT OF TRAFFIC. KEEP COMBUSTIBLE MATERIALS SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS, CLOTHES AND CURTAINS AT LEAST 36" FROM THE FRONT OF THE APPLIANCE. NEVER LOCATE THIS ELECTRIC APPLIANCE WHERE IT MAY FALL INTO A BATHTUB OR OTHER WATER CONTAINER.
  • Page 7: Installation

    THIS APPLIANCE IS HEAVY. IT IS HIGHLY RECOMMENDED THAT TWO PEOPLE INSTALL THIS APPLIANCE. 68.6 Your EFL42S is a wall-mounted appliance. Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffi c areas. NOTE: Follow all National and local electrical codes.
  • Page 8: Minimum Clearance To Combustibles

    MINIMUM CLEARANCE TO COMBUSTIBLES Measurements are taken from the glass front. Bottom 0" 8" (203mm) to mantel Sides 0" 8" (203mm) to ceiling Back 0" NOTE: The power switch is located on the lower right hand side of the appliance. Always ensure that access to this switch remains available.
  • Page 9: Installing The Appliance

    INSTALLING THE APPLIANCE Due to the many different materials used on different walls, it is highly recommended that you consult your local builder before you install this appliance on the wall. BODY Select a location that is not prone to moisture. GLASS FRONT Have two people hold the appliance against the wall to determine the fi...
  • Page 10: Recessing Installation

    RECESSING INSTALLATION Due to the many different fi nish materials used on walls, it is highly recommended that you consult your local builder before you install this appliance in the wall. Select a location that is not prone to moisture and is located at least 36" (914mm) away from combustible materials such as curtain drapes, furniture, bedding, paper etc.
  • Page 11: Mounting Bracket Installation

    3.4.3 MOUNTING BRACKET INSTALLATION Remove the glass front, refer to "GLASS FRONT INSTALLATION" section for removal instructions. Remove the glass media from the appliance prior to installing the mounting brackets. Prior to installing the mounting brackets determine if you will be recessing the appliance partially or fully.
  • Page 12: Hard Wiring Installation

    HARD WIRING INSTALLATION WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. HARD WIRING CONNECTION If it is necessary to hard wire this appliance, a qualifi ed electrician must remove the cord connection, and wire the appliance directly to the house hold wiring.
  • Page 13: Finishing

    4.0 FINISHING WARNING POWER SUPPLY SERVICE MUST BE COMPLETED PRIOR TO FINISHING TO AVOID RECONSTRUCTION. AIR OPENINGS CANNOT BE COVERED IN ANY CIRCUMSTANCES. GLASS DOOR REMOVAL WARNING GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED. FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR SERVICE.
  • Page 14: Operating Instructions

    5.0 OPERATING INSTRUCTIONS Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate. NOTE: Ensure the house circuit breakers for the power supply are turned on. In the event of a power failure, when the main power switch of the appliance is in the "I" ON position and the hand held remote control is in the OFF position, the fl...
  • Page 15: Wiring Diagram

    6.0 WIRING DIAGRAM WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. W415-1142 / E / 07.13.15...
  • Page 16: Replacement Parts

    7.0 REPLACEMENT PARTS Contact your dealer or the factory for questions concerning prices and policies on replacement parts. Normally all parts can be ordered through your Authorized dealer / distributor. WARNING FOR WARRANTY REPLACEMENT PARTS, A PHOTOCOPY OF THE ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR THE CLAIM. FAILURE TO POSITION THE PARTS IN ACCORDANCE WITH THIS When ordering replacement parts always give the following information:...
  • Page 17: Troubleshooting

    8.0 TROUBLESHOOTING WARNING TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. SYMPTOM PROBLEM TEST SOLUTION Dim or no fl ame Drum LED’s are burnt out Inspect the LED’s inside the fl ame generation cylinder drum (W010-2918) and replace them if necessary Ember bed is not Ember LED’s are burnt out...
  • Page 18: Warranty

    NAPOLEON warrants its products against manufacturing defects to the original purchaser only. Registering your warranty is not necessary. Simply provide your proof of purchase along with the model and serial number to make a warranty claim. NAPOLEON reserves the right to have its representative inspect any product or part thereof prior to honouring any warranty claim.
  • Page 19: Service History

    10.0 SERVICE HISTORY 43.1...
  • Page 20 napoleonproducts.com...
  • Page 21 N° DE MODÈLE Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 103 Miller Drive, Crittenden, Kentucky , USA, 41030 Téléphone 705-721-1212 • Télécopieur 705-722-6031 • www.napoleonfoyers.com • hearth@apoleonproducts.com W415-1142 / E / 07.13.15...
  • Page 22 TABLE DES MATIÈRES INTRODUCTION DIMENSIONS HOMOLOGATIONS INSTRUCTIONS GÉNÉRALES DÉBALLAGE ET VÉRIFICATION DE L'APPAREIL EMPLACEMENT DE L'APPAREIL MISE À LA TERRE DE L'APPAREIL INSTALLATION DÉGAGEMENTS MINIMAUX AUX MATÉRIAUX COMBUSTIBLES DÉGAGEMENTS MINIMAUX DE LA TABLETTE INSTALLATION DE L'APPAREIL INSTALLATION ENCASTRÉ 3.4.1 DÉGAGEMENT MINIMUM AUX COMBUSTIBLES 3.4.2 OSSATURE 3.4.3...
  • Page 23: Introduction

    1.0 INTRODUCTION AVERTISSEMENT • Ne faites pas fonctionner l’appareil avant d’avoir lu et compris les instructions d’utilisation. Ne pas respecter les instructions pourrait causer un incendie ou des blessures corporelles. • Risque de brûlures. L’appareil doit être éteint et refroidi avant d’effectuer l’entretien. Pour débrancher l’appareil, mettez d’abord les boutons de contrôle à...
  • Page 24: Dimensions

    VUE DU SOMMET TOP VIEW 35 1/2" [902mm] HOMOLOGATIONS Cet appareil a été testé selon les normes CSA pour foyers EFL42S Numéro de modèle électriques installés de façon permanente Installation murale Description aux États-Unis et au Canada. Si vous avez besoin...
  • Page 25: Instructions Générales

    INSTRUCTIONS GÉNÉRALES AVERTISSEMENT VEUILLEZ LIRE LE MANUEL D’INSTRUCTIONS EN ENTIER AVANT DE COMMENCER L’INSTALLATION. OMETTRE DE SUIVRE CES INSTRUCTIONS POURRAIT CAUSER UN MAUVAIS FONCTIONNEMENT DE L’APPAREIL ET ENTRAÎNER DES BLESSURES GRAVES ET/OU DES DOMMAGES MATÉRIELS. TOUS LES APPAREILS ÉLECTRIQUES CONTIENNENT DES COMPOSANTS INTERNES QUI DEVIENNENT CHAUDS ET QUI PRODUISENT DES ÉTINCELLES.
  • Page 26: Emplacement De L'appareil

    2.0 EMPLACEMENT DE L'APPAREIL AVERTISSEMENT EN RAISON DES TEMPÉRATURES ÉLEVÉES, L'APPAREIL DEVRAIT ÊTRE PLACÉ LOIN DES ENDROITS PASSANTS. GARDEZ TOUS LES ARTICLES COMBUSTIBLES TELS QUE LES MEUBLES, LES OREILLERS, LA LITERIE, LE PAPIER, LES VÊTEMENTS ET LES RIDEAUX À UNE DISTANCE D’AU MOINS 3 PIEDS (0,9 MÈTRE) DE LA FAÇADE DE L'APPAREIL.
  • Page 27: Installation

    SOUS DE L’APPAREIL. 68.5A Votre appareil EFL42S est fi xé au mur. Choisir un emplacement convenable qui n'est pas susceptible à l'humidité et est loin des tentures, les meubles et les hauts secteurs de circulation. NOTE: Suivre tous les codes électrique national et locaux.
  • Page 28: Dégagements Minimaux Aux Matériaux Combustibles

    DÉGAGEMENTS MINIMAUX AUX MATÉRIAUX COMBUSTIBLES Les mesures sont prises à partir de la façade vitrée. Dessous 0" Haut 8" (203mm) au tablette Côtés 0" Haut 8" (203mm) au plafond Arrière 0" NOTE: L'interrupteur est situé à l'abaisser du côté droite de l'appareil. Garantie toujours que l'accès à cette interrupteur est disponible.
  • Page 29: Installation De L'appareil

    INSTALLATION DE L'APPAREIL Puisque les murs peuvent être recouverts de divers matériaux, nous vous conseillons fortement de retenir les services d’un professionnel qualifi é pour ces travaux. Choisissez un endroit non sujet à l’humidité. CORPS Demandez à deux personnes d’appuyer et de maintenir l’appareil FACE DU VITRE contre le mur pour en déterminer l’emplacement défi...
  • Page 30: Installation Encastré

    INSTALLATION ENCASTRÉ En raison de trops de matériels fi nis différentes utilisé sur les murs, il est extrêmement recommandé que vous consultez votre constructeur local avant que vous installez cet appareil dans le mur. Choisissez un endroit non sujet à l’humidité et situé à au moins 36 pouces (914mm) des articles combustibles, tels que les rideaux, meubles, literie, papier, etc.
  • Page 31: Installation Du Support De Fixation

    3.4.3 INSTALLATION DU SUPPORT DE FIXATION Enlever le verre du devant de l'appareil, se référer à la section «INSTALLATION DE LA FAÇADE VITRÉE ». Enlever le médias de verre de l'appareil, avant d'installer les support de fi xation. Avant d'installer les supports de fi xation choisi si vous encastré l'appareil entièrement ou partiellement Fixé...
  • Page 32: Branchement Par Cable

    BRANCHEMENT PAR CABLE AVERTISSEMENT COUPEZ L’ALIMENTATION ÉLECTRIQUE À L’APPAREIL ET LAISSEZ-LE REFROIDIR AVANT D’EFFECTUER UN ENTRETIEN. SEUL UN TECHNICIEN DE SERVICE QUALIFIÉ PEUT EFFECTUER L’ENTRETIEN OU LA RÉPARATION DE CET APPAREIL ÉLECTRIQUE. Si c'est nécessaire de faire un branchement par câble, un électricien qualifi é peut retirer le cordon d’alimentation de l'appareil et brancher ce dernier directement au câblage de la maison.
  • Page 33: Finitions

    4.0 FINITIONS AVERTISSEMENT LE RACCORDEMENT PAR CÂBLE DOIT ÊTRE COMPLÉTÉ AVANT LA FINITION AFIN D'ÉVITER TOUTE RECONSTRUCTION. LES ENTRÉES D'AIR ET LES SORTIES D'AIR DE L'APPAREIL NE DOIVENT JAMAIS ÊTRE COUVERTES. ENLÈVEMENT DE LA FAÇADE VITRÉE AVERTISSEMENT LES LOQUETS DE PORTE FONT PARTIE D'UN DISPOSITIF DE SÉCURITÉ ET DOIVENT ÊTRE ADÉQUATEMENT VERROUILLÉS.
  • Page 34: Instructions De Fonctionnement

    5.0 INSTRUCTIONS DE FONCTIONNEMENT Quand l'appareil est prêt à fonctionner dès qu'il est correctement branché dans une prise de courant mise à la terre. NOTE : Assurez-vous que les disjoncteurs de la maison pour ce circuit soient allumés. Lors d'une panne de courant, si l’interrupteur est à...
  • Page 35: Schéma De Câblage

    6.0 SCHÉMA DE CÂBLAGE AVERTISSEMENT COUPEZ L’ALIMENTATION ÉLECTRIQUE À L’APPAREIL ET LAISSEZ-LE REFROIDIR AVANT D’EFFECTUER UN ENTRETIEN. SEUL UN TECHNICIEN DE SERVICE QUALIFIÉ PEUT EFFECTUER L’ENTRETIEN OU LA RÉPARATION DE CET APPAREIL ÉLECTRIQUE. W415-1142 / E / 07.13.15...
  • Page 36: Rechanges

    8.0 RECHANGES Contactez votre détaillant ou le fabricant pour les questions concernant les prix et la disponibilité des pièces de rechange. Normalement, toutes les pièces peuvent être commandées chez votre détaillant autorisé. POUR UN REMPLACEMENT DE PIÈCE SOUS GARANTIE, UNE PHOTOCOPIE DE LA FACTURE ORIGI- NALE SERA REQUISE AFIN DE POUVOIR HONORER LA DEMANDE.
  • Page 37: Guide De Dépannage

    9.0 GUIDE DE DÉPANNAGE AVERTISSEMENT COUPEZ L’ALIMENTATION ÉLECTRIQUE À L’APPAREIL ET LAISSEZ-LE REFROIDIR AVANT D’EFFECTUER UN ENTRETIEN. SEUL UN TECHNICIEN DE SERVICE QUALIFIÉ PEUT EFFECTUER L’ENTRETIEN OU LA RÉPARATION DE CET APPAREIL ÉLECTRIQUE. SYMPTOM PROBLEM TEST SOLUTION La luminosité du LED’s sont brûlées.
  • Page 38: Garantie

    10.0 GARANTIE Les foyers électriques NAPOLÉON sont fabriqués conformément aux normes strictes du Certifi cat d’assurance de qualité mondialement reconnu ISO 9001 : 2008. Les produits NAPOLÉON sont conçus avec des composants et des matériaux de qualité supérieure, assemblés par des artisans qualifi...
  • Page 39: Notes

    11.0 NOTES 44.1 W415-1142 / E / 07.13.15...
  • Page 40 napoleonproducts.com...

Table of Contents