Miele PW 6080 Vario AV Setting Manual page 9

Transport struts
To repeat the commissioning process
To finish the commissioning process
A message will appear in the display to remind you to remove
the transport struts.
^ Remove them (if this has not already been done by your
fitter). Then press the multi-function selector to confirm that
this has been done.
If you are not certain that all of the settings are correct, you
will need to repeat the commissioning process.
Set up successful
i
OK
H
^ Select Back and confirm your selection.
The commissioning process must then be repeated.
– 1. Confirm
If you are sure that all of the settings are correct.
Set up successful
i
OK
H
^ Confirm with OK.
The entry menu will appear.
Commissioning the machine
Back A
H
Back A
H
9