Miele PW 6080 Vario AV Setting Manual page 10

Commissioning the machine
10
1 Cottons Uni.
2 Minimum iron
3 Delicates
4 Woollens H
To finish the commissioning process completely, a first wash
program must be started.
If the power to the machine is switched off before the first
wash program is started (e.g. by pressing the K button),
the commissioning process can be carried out again.
Once a wash program that is longer than 20 minutes has
been run, it is not possible to carry out the commissioning
process again.
– 2. Start the first wash program
For safety reasons, spinning is not possible until the first
wash program has been run. To activate the spinning
function and to complete the commissioning process, you
must run a wash program without laundry and without
detergent.
^ Open the stopcocks.
^ Select Cottons 60°C and confirm your selection.
The main menu for Cottons Universal will then appear.
^ Press the flashing Start button.
After this program has finished, the washer-extractor is ready
for processing laundry.
60°C Program selection...
40°C Settings F...
40°C
03:00
30°C