Replacing The Dust Bag, S-Bag; Replacing The Motor Filter And Exhaust Filter - Electrolux EL6986A Instructions Manual

B
A
C
D
1a
3
6
9
12
A
B
1b
4
7
10 11a
English
REPLACING THE S-BAG™ DUST BAG
1
2
2
3
4
5a Insert a new s-bag™ by pushing the cardboard right
5b Attach the insert by placing it on the back pegs in
5
Note: Replace the dust bag when the indicator is red, even if
the bag is not full (it could be obstructed). Also replace after
vacuuming carpet cleaning powder. Be sure to use only an
original Electrolux s-bag™ Classic, s-bag™ Clinic or an s-bag™
Anti-odor dust bag.
Replacement of the motor filter
should be done with every 5th replacement of the dust bag,
6
7
8
9
10 Reattach the filter holder containing the new motor
8
11 Replace the insert holding the s-bag™ and then close
Replacement of the exhaust filter
should be done with every 5th replacement of the dust bag.
Note - be sure to unplug the cleaner before changing the
dust bag or filter.
The filters must always be replaced with new ones and
cannot be washed.*
12 Fold up the carrying handle until it clicks into place.
13 Place your thumbs on the back edge of the lid and
14 Lift out the filter. Insert a new filter and replace the lid
On/Off switch
11b
International symbol I means On, international symbol O
means Off.
*Certain models only
The s-bag™ du st bag must be replaced when the
indicator window is completely red. Read indicator
with the nozzle lifted.
Fold down the carrying handle. Press the catches on
the hose, remove the hose and open the cover.
Lift out the insert holding the s-bag™.
Pull the cardboard to remove the s-bag™ from the in-
sert. This automatically seals the s-bag™ and prevents
dust leaking out.
into the end of the groove in the insert.
the bag compartment. Then fold down the insert and
close the cover.
Fold down the carrying handle. Press the catches,
remove the hose and open the front cover.
Lift out the insert holding the s-bag™.
Pull the motor filter holder upwards until it comes
away from the groove.
Carefully pull the old, dirty filter out of the filter holder
and replace it with a new motor filter.
filter.
the cover.
then open the lid by pulling the handle backwards
and upwards with your index/middle finger.
as shown.